Computer Control Torsion Testing Machine Spring Testing Machine,Torsion Test Equipment,Torsion Spring Tester,Computer Control Torsion Testing Machine Jinan Chenda Testing Machine Manufacturing Co., Ltd. , https://www.jncdtester.com
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131"; Home>Bearing knowledge>Selection of bearing scale Bearing size selection
In many cases; the inner bore dimension of the bearing has been limited by the layout of the machine or equipment. Regardless of the number of operating life; the static load safety factor and the economic function are all at the demand; before the other dimensions and layout of the bearing are selected at the end; It must be scaled. The calculation involves comparing the bearing practice load to its load. /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
The static load of the rolling bearing means that the bearing is stopped after loading (no relative movement between the inner and outer rings) or the rotation speed is very low. In this case, the safety factor of excessive plastic deformation of the raceway and the rolling body is calculated.
Most of the bearings are subjected to dynamic loads; the inner and outer rings are used for relative motion; the scale calculation is used to check the safety coefficient of early fatigue damage of the rolling races and rolling bodies.
As long as in special circumstances; according to DINISO281, the nominal life calculus is calculated for the number of operational lifespans that can be reached. For the depiction of economic function; the bearing capacity of the bearing should be fully utilized. The more abundant the bearing is used. The more accurate the calculation accuracy of the bearing scale is.
Recommend to friends comments close window Bearing related knowledge The demand for smooth grease in the sintered bearing sliding bearing in mobile phone oscillating motor: Talking about the key skills in the production of NSK high-precision bearing (2)
Basic requirements for rolling bearings for machine tool spindles
This article links to http://
Please indicate the bearing network http://
Previous:The locking method of bearing Next: Bearing method
Bearing size selection
Source: China Bearing Network Time: 2018-05-08