Recently, many friends in the decorative building materials industry and security products industry are asking: What is the prospect of doing fingerprint lock agents?
Brazing sintered diamond Saw Blade features
1, the diamond edge can be 2/3 of the diamond height, so grinding
Cutting efficiency is high, and is conducive to scouring debris, surface abrasive particles are not easy to cause
Blockage and loss of grinding ability.
2, due to the high edge of diamond, chip tolerance space, diamond and base
The high binding strength between the bodies prevents the diamond from falling off.
3, brazing diamond saw blade is suitable for cutting ceramics, microcrystalline stone, people
Stone, marble, super sharp.
What are the advantages of brazing diamond saw blade
1, high cutting edge rate, cutting efficiency is very high;
2, diamond and matrix chemical combination, in the work is not easy to take off
Fall;
3. High sharpness, straight cutting edge, fast feeding speed and easy feeling;
4, large chip space, surface abrasive is not easy to lose grinding due to blockage
Ability.
If cracks appear on the grinding wheel in the process of use, stop using the grinding wheel immediately and replace the cutting piece with a new one to avoid breaking the cutting piece and injuring others.
Diamond Blade,Stone Circular Saw Blade,Angle Grinder Stone Blade,Electroplated Diamond Cutting Wheel Henan Jinlun Superhard Material Co., Ltd , https://www.jinlunsuperhard.com
Fingerprint locks have been developing in the country for a decade now. If you said a few years ago, I do not recommend that you do such a product. However, I am very supportive of your ideas now. In the past few years, especially since 2012, fingerprint locks have begun to develop and popularize at a very rapid pace. At present, many domestic real estate communities have chosen fingerprint locks. The reason is very simple. Fingerprint opening will certainly replace the key opening. This is a big development direction.
If you choose to do fingerprint lock, you need to consider the following points:
1. You need to establish your own installation and after-sales service team. Fingerprint lock is different from traditional locks. It is a bit similar to home appliances. The user needs a process to recognize it. Inevitably, there must be a service.
2. Choosing a good brand of products to make a so-called good brand means that the brand's company must have a certain strength, product quality must be guaranteed, the product's functional orientation must meet the needs of the current market, product prices have advantages .
3. Choosing the right company size based on your financial strength The choice of company size is in fact all about service capabilities. The larger the scale, the stronger the service capacity should be; generally it can be divided into distributors, agents, regional agents, and general agents. The higher the level, the more money you need because you have to stock and turn around. If there is no successful agent experience and capability for other products, it is advisable to start with the minimum level.
4. Agent fingerprint lock does not mean that you only sell fingerprint lock Fingerprint lock agent does not mean that you only sell fingerprint locks, taking into account the company's sales and capital turnover, the general "fingerprint" is a good entry point for these two words, if It will be a better choice if the selected brand manufacturer can provide other fingerprint products at the same time. Or you can choose to provide related solutions, such as hotel networking solutions, Second Landlord, public rental housing, intelligent solutions. Among them, the fingerprint lock is the breakthrough point.
Some suggestions and opinions about joining Tianjin anti-theft locks