Floor repair method floor how to clean

If you accidentally drop a heavy object or a sharp object on a solid wood floor in your life, it will cause the floor to scratch to varying degrees and damage the paint on the ground surface. Therefore, it is advisable that the user should preferably place a carpet inside or inside the room so as to prevent the sand on the shoes from being carried into the floor. It is best to replace the slippers in the room. Next, learn about the floor repair method and how to clean the floor.

Floor repair method

1, if it is a solid wood floor, a small area of ​​scratches, you can not repair, you can choose furniture, carpets and other decorative objects to cover the damaged place. If the minor scratches, please visit the factory professionals to paint repair; if the damaged area is relatively large, then it must be part of the resurfacing repair; for particularly serious can only choose to re-lay the floor.

2, floor paint repair is best to ask factory professionals to repair the above, you can use special repair paint or gel and other products, so that you can better guarantee the repair effect, so that both environmentally friendly and beautiful.

3, for the repair of local damage, first destroy the solid wood floor, and then remove, and then use the tool will replace the short side of the solid wood floor to cut a gap, with the saw will need to replace the solid wood floor saw, in the process Do not damage the surrounding solid wood floor. After removing the solid wood floor, clean the surroundings and install it. When clearing the glue, you can use the small piece of solid wood flooring to slide back and forth on the interface to find the residual glue traces and clear it to ensure that the restored solid wood floor is beautiful.

4. When replacing a new solid wood floor, pay attention to the details and clean it around. Take care to reserve some space. Apply glue on the floor and put it in the gap of the waste plate. First insert the corners of the long-side tongue and the short-side tongue into the notches of the original four-floor floor, then press the side of the notch by hand, and gently plunge the wooden block with a special tool. When replacing, pay attention to the length of the new floor and the space.

How to clean the floor

1. Candles: After the burning candle is accumulated, when a certain amount is collected, add some turpentine to the wax and boil it in a pot filled with cold water. After the candle is melted, pour it into a jar and cool it. The floor wax can be heated slightly before use.

2, in the cauldron into the soap, bleaching earth, baking soda and water to fully mix, boil his mother, and then cooled and stored in a can later. Apply a brush to the back and forth brush on the floor, brush it along the floor, clean it with hot water and dry it.

3, salad oil, milk and tea: When you rub the floor, you can add a few drops of salad oil, you can make the floor more bright. In addition, dirt on the paint floor can be wiped off with strong tea juice. Burn the stains on the kitchen floor with burnt honey soot, then sprinkle some vinegar on the mop so that the stains are easily removed.

4. Concentrated alkali water: If oily stains such as lubricants appear on the floor, you can use a solution of boiled alkaline solution to clean it, then cover the stain with bleached earth and hot water, and keep it clean for one night. Repeat if necessary.

5, salt: for the egg on the floor, you can sprinkle salt on the egg, wait for time and minutes after the cleaning, the egg on the floor is easily removed.

Editor's summary: The floor repair method and how to clean the floor are introduced here. I hope to help everyone. Want to learn more related knowledge can focus on this site information.

Solid wood floor repair composite floor repair floor repair

AHR Rubber Horizontal Slurry Pump

1. Naipu NP-AHR series centrifugal slurry pumps and spare parts can fully interchange with world famous brand.These pumps are of heavy-duty construction, designed for continuous pumping of highly abrasive and corrosive slurries. The wet end parts are elastomer rubber.

2. Typical Applications---

Minerals Flotation Processing
Electric Factory Coal Preparation
Coal Washing
Chemical Medium Processing
Effluent Handling

Sand And Gravel Handling

3. Construction Drawing of NP-AHR Series pumps

construction


main part No. and material

4. Select chart of NP-AHR series slurry pumps

AH(R)pump select chart

5. Performance chart of NP-AHR series pump.

NP-AH Pump performance parameter



AHR Rubber Slurry Pump,AHR Horizontal Slurry Pump,AHR Slurry Pump,AH Mining Slurry Pump

Shijiazhuang Naipu Pump Co., Ltd. , https://www.naipu-pump.com