Handheld rebar breaker use taboo

Hand-held rebar breaker is a non-pipe rescue tool, which integrates high-hardness shear blade, ultra-high pressure hydraulic pump, micro-motor and large-capacity battery. It is highly integrated and comes with battery hydraulic pump. It is easy to use. This type of rescue tool is compact, lightweight, easy to carry, can be operated with one hand, the head can be rotated 360 degrees, convenient for the needs of a variety of workplaces, cutting edge available on all sides, greatly improving the blade usage. Widely used in fire and rescue, emergency rescue, traffic accidents, earthquake rescue, rescue of high altitude and complex terrain, can quickly and efficiently cut steel bars , steel pipes, demolition and shearing vehicles, house security windows; also applicable to all kinds of construction site operations; Such as electricity, telecommunication construction, civil construction, demolition work, or the use of sites such as coal mines.

1 , working environment

1.1 The use of this cutting machine is prohibited in the event of a fire hazard or explosion.

1.2 The working environment should be kept clean and bright.

1.3 The working environment should not have children and other unrelated people.

2 , dressed appropriately

2.1 Inappropriate clothing can cause injuries and accidents.

2.2 It is recommended to wear safety glasses and dust mask when necessary.

3 , It is forbidden to limit the use of tools in improper use instructions

3.1 It is forbidden to operate improperly so as not to cause accidents where the aircraft is destroyed or destroyed.

4 , prohibit unauthorized disassembly

4.1 When repairs are required, contact your dealer or distributor.

5 , the charger and battery storage temperature should not be higher than +50 °C (such as in the summer metal box or car), the temperature is too high can damage or burn the battery.

6. It is forbidden to use when abnormality is found.

6.1 When used abnormally, it can cause malfunction.

6.2 If an abnormality is found, contact your dealer or store for repairs.

7 , using a dedicated battery and charger

7.1 prohibit the use of ordinary dry batteries or car batteries.

8 , charge correctly

8.1 Charging from the end marked “Rated Input” to avoid charging errors or burning.

8.2 The charging temperature is 5 °C ~ 35 °C. If the temperature is too high, it may cause explosion or fire.

8.3 Charge should be kept well ventilated, do not apply clothing cover when charging, so as to avoid explosion or burning.

9. Do not shorten the leads of the battery pack to avoid burning or exploding.

10. It is forbidden to throw the battery pack into the fire so as to avoid explosion or produce toxic substances.

11. If the rebar hardness is high, the rebar tends to splash when cutting, and the operator should pay attention to the observation, and no one stands in the direction of the danger.

1 2. Do not allow the cutter to come in contact with rain or use it in a wet environment to avoid electric shock.

13. Do not block the cutter's vents and prohibit foreign objects from entering the cutter:

13.1 In order to avoid causing combustion or malfunction

13.2 Foreign objects can spill out and cause danger.

14. When the cutting machine is working, do not touch the moving parts to avoid the hands being caught.

15. It is forbidden to use the cutting machine continuously for a long time, so as to avoid excessive temperature affecting the performance of the machine and damaging the motor.

16 , prohibit the cutter from falling

16.1 to avoid damage to the machine.

16.2 When working at height, pay attention to the surrounding environment.

17. Use the specified blades and accessories, otherwise it may cause malfunction, accident or injury.

18 , the use of the provisions of the oil, otherwise it is easy to cause power loss, damage to the machine.

19. Do not use a battery cable to pull the cutting machine or pull the plug so as not to damage the cable and cause electric shock.