Slide line indicator installation method

The following are the details about the manufacturers of trolley line indicator trolley line, the price of trolley line indicator trolley line, the monopole safety trolley line of the trolley line indicator, and the slide collector line of the trolley line indicator line:

Installation and use methods Please check whether the power supply and lamp rated voltage match.

The luminaire uses 2 M8 screws and the mounting surface is fixed. The mounting surface should be flat and have sufficient mechanical strength.

Remove the buckle and open the cover to expose the terminal block.

Connect the power cable from the cable gland and connect the power cable correctly according to the terminal definition on the label.

After checking, turn on the power and the corresponding indicator lights up.

Main functions and features The outer shell is made of cold-rolled plate spray process, which is durable and corrosion-resistant.

A plurality of LED light-emitting diodes constitute a lamp surface and have a long service life.

The use of silicone rubber seals, multiple sealing structure, high protection level.

The installation method is flexible and convenient. The number and color of the lamps can be combined in any combination and the application range is wide.

Sliding line indicator, also known as red, yellow, and green three-phase indicator, dedicated LED lights for traffic.

The type specification of the trolley line indicator is: ABC-HCX. According to the diameter of the lamp plate, it can be divided into the following common specifications: ABC-HCX-50 lamp plate diameter: 50mm

ABC-HCX-100 lamp pan diameter: 100mm

ABC-HCX-150 lamp plate diameter: 150mm

The main technical parameters

Operating Voltage

AC220V/AC380V

Power frequency

50Hz~60Hz

rated power

<8W (single lamp power)

Glow color

Red, yellow, green

Visual distance

>200m

Light source life

100,000h

Way of working

Chang Liang

Wiring method

Y type connection

Operating temperature

-30°C ~ +70°C

Protection level

IP65

Working humidity

10% ~ 95% (non-condensing)

Material

Cold rolled plate / stainless steel 304 (optional)



Formwork Accessories

Timber-beam Formwork


Timber Beam H20---cost-effective formwork girder

Formwork

With Timber beam & Plywood, the formwork is low weight but high load capacity, it is widely used in construction.

Flat Formwork

Characteristics:

Component with high standardization.

Assembling in site, flexible application.

Light weight, easy transportation and storage.

Single-side bracket

During single-sided concreting, the concrete pressure is transferred into the sub-structure by means of the single-side bracket.

Characteristics:

â—† For concrete heights up to 8.0m and a fresh concrete pressure up to a maximum of 60KN/m2.

â—† Good standard performance and versatility.

â—† Fast element coupling, all units can be quickly connected.

â—† The finished wall is excellent and absolutely waterproof.

â—† Optimized sizes for transportation.


Formwork Accessories,Concrete Formwork Accessories,Tie Rod Formwork Accessories,Aluminium Formwork Accessories

HENGSHUI PIONEER IMP & EXP TRADING CO ., LTD , https://www.hspioneer.com