Less take the curb cabinet purchase design process

Cabinets are the soul of the whole kitchen. To cooperate with projects such as water and electricity, ceilings, and so on, a lot of processes are run through them. Therefore, the renovation of rookies will be incomprehensible. And because of the high availability of cabinets, its design and quality are also very important. However, many owners do not understand the design process of cabinet purchases, resulting in inadequate communication, detours, and budget wastage. So today we will briefly talk about the design process of cabinet purchase.

one. Before the renovation, choose the cabinets.

Choose your brand, decide on your favorite styles and materials, and discuss prices. After clarifying the intention of ordering, a certain amount of deposit must be paid to make a preliminary appointment.

Editor's Reminder: Be sure to think clearly before the initial test, because generally after the initial test, the deposit is not refundable, but at the time of signing, the deposit can be deducted from the total price.

two. After the construction team enters the field, the cabinet designer starts the door test

Only after the cabinet plan is confirmed can the water circuit construction be started. After the construction team enters the venue, the first time the cabinet design is first tested at the door, when the cabinet designer measures the dimensions, what requirements are required to explain it clearly on the face, including specifications, sizes, and explanations of the range hoods, stoves, refrigerators, sterilizers, etc. The more detailed, the closer the cabinets are to your actual needs.

Editor's note: When the initial test required water and electricity workers, cabinet designers, the owner of the three parties present, negotiate and communicate together: determine the structure of the cabinet, the location of the power supply, the approximate location of the electrical appliances.

three. Designers make drawings

The designer generally completes the overall plan of the cabinet within 3 days and notifies the customer of the plan. The more formal the business, the more standardized the drawings. If there is objection to the plan, communicate with the designer and correct it. No problem after the designer's modification, a hydropower reform map.

Editors remind: plan drawings must be read, do not understand the place must be asked clearly, do not fool yourself, causing future regrets.

TIPS: Design Principles

Side dish area: Absolutely need to maintain a distance of 80mm between sink and cooker, 100mm better. This is the center of the kitchen: fish, meat, vegetables, etc. are all ready here. The required cooking utensils and seasonings should be kept within easy reach.

Washing area: The most common combination of sinks and drain pans is: Two sinks are 340 mm and 293 mm wide, mounted on a 800 mm wide cabinet. Close to the sink should be: closets for cups, dressing boxes, glassware and plates; closets for cooking utensils such as nets and dishes; drawers for utensils, cutlery, etc.; for decontamination, detergents or other chemicals The cleaning agent is located in the bottom cabinet under the sink, which is also the best place for the built-in trash can. Because children can open this cabinet, it is wise to lock the cabinet.

Illumination: It is more important to install light-adaptive lights in place than high-wattage lights. The daylight in the countertop area should come from the ceiling lights in the kitchen and the lights installed on the front of the closet. The important point is that the light is not reflective on the work surface, and it is properly shielded by a covering like a curtain box under a closet so that the eyes are not directly exposed to light.

Line of sight: Wall cabinets, range hoods, or light boxes should not block the user's eyes, so that he can not see the things behind the table. It is very important to keep the distance between the work surface and the bottom of the closet. 50 cm is generally enough.

Take the height: commonly used cookware should be placed at a convenient place. The take-up height should be set to the height that the user's hand does not have any steps under the feet after stretching. The height of the highest cabinet of a wall cabinet that a person with a height of 165 cm can reach is about 190 cm. Older people will find it difficult to bend over and squat. Pull-out decks or baskets make it easy to pick and place things. Those who can only work in a sitting position have more restrictions, so the kitchen storage space designed for wheelchair users should be carefully considered.

Editor's note: From a safety point of view, drawers should not be placed directly around the stove, and children would pull the drawers out of the ladder to climb up to a height where they would hit the hot pot and get hurt.

Four. Tiles, ceiling repositioning after the test, a map, sign the contract

After confirming that the floor tiles and wall tiles have been laid, ceilings, water heaters and gas meters are in place, and relevant electrical data is ready for use, appoint the cabinet designer to retest. After the bricklayers are completed, the designer comes to the site for retesting. There are no problems with the retest drawings. You can select the suit, set the hardware, sign the contract, and officially put it into production.

Editor's Reminder: Before signing the contract, the plan can be changed when there is no conflict with the water circuit. The retested plan cannot be changed. General customized cabinet products, changes are to be charged. Therefore, before retesting the map, we must think of all our needs.

Fives. Delivery, installation, payment

Two days before the date of the contracted installation, businesses should generally remind and ask the owners if they are normally installed. If they are installed normally, the merchants deliver and install. If there is a change, negotiate the installation date. After the installation is completed, the final payment will be paid.

Editor reminds: Cabinet installation process, range hoods, gas stoves, kitchen appliances and other appliances to synchronize the installation, one in place.

Whole Cabinets Cabinets Installation Cabinets Installation Process Cabinets

DIN Sanitary Pipe Fittings

Our Stainless Steel DIN Sanitary Pipe Fittings includes sanitary elbow, sanitary tee, sanitary reducer, with Welded, Tri-Clamped, Threaded ends, which is used in food, milk, beer, brewage, pharmacy, comestic, biopharmacy, etc. Material in SS304 & SS316L, Standard including 3A, DIN, SMS, BS, RTJ, ISO, IDF, DS, INCH, etc,size from 1/2" to 12".

Kaysen Steel is a China manufacturer, supplier and exporter for Stainless Steel Sanitary Pipe Fittings, DIN Sanitary Pipe Fittings, DIN Hygienic Fittings, DIN food grade fittings.

Din Sanitary Pipe Fittings,Din Sanitary Fittings,Din Hygienic Fittings,Din Fittings

Kaysen Steel Industry Co., Ltd. , https://www.chinasanitaryvalve.com