Mine Equipment,Prospecting Equipment,Mining Machines,Gold Prospecting Equipment Taiyaun JDS Machinery And Equipment Co., Ltd. , https://www.jdsmachine.com
Installation of wireless roll gate magnets The magnets (heavy iron components) should first be mounted on the inner side of the roll gate (generally close to the side), and the fixed reed sensor (lighter iron part) mounted on its corresponding lower ground. ) When the shutter is closed, the distance between the magnet and the reed sensor is no more than 2 cm.
The wireless signal transmitter is connected to the reed sensor via a steel soft sheath. Wireless transmitters must be installed where the host can receive wireless signals. If the host is far away from the wireless signal transmitter or there is shielding between them, the connection between the wireless signal transmitter and the reed sensor can be lengthened. For example, if a user lives on the 8th floor, and the garage is on the first floor, you can The connection extends to the home of the 8th floor and the wireless signal transmitter is installed in the user's home so that the host can receive the wireless signal.
Black Cat Guardian Technical Department reminds you to pay attention to the following points when installing the magnetic gate:
1. The distance between the magnet and the reed sensor is no more than 2 cm;
2, the signal transmitter can not be installed on the metal material;
3, the magnet and the reed switch must be opposite
The correct installation method of wireless shutter gates, such as storefronts and garages
The roll gate has a dedicated door magnet, which can be easily installed on the roll gate. How to properly install the wireless roller gate magnet is our concern.