[China Aluminum Network] In recent years, China's door and window hardware industry has been greatly improved, especially in the door and window products represented by aluminum doors and windows, with good resistance to wind pressure, watertightness, thermal insulation, etc. The market is getting more and more popular. Catering to meet the increasing consumer demand for home improvement. With the continuous improvement of living standards, people pay more and more attention to details such as the practicality and beauty of doors and windows decoration. Towel Rack,Bathroom Wall Rack,Brass Towel Rack,Brass Bathroom Hooks Heshan Jasupi Sanitary Ware , https://www.jasupifaucets.com
Although the performance advantages of aluminum-wood doors and windows are outstanding, just as “Chorima†also needs “Bole†appreciation, aluminum-wood doors and windows also need a certain way of maintenance and maintenance in peacetime, in order to avoid quality damage and thus extend the length of aluminum doors and windows. Lifetime, better use of effectiveness.
Method/Step 1: When cleaning glass, frames, fans and other broken bridges, aluminum doors and windows, and aluminum doors and windows, use a soft cloth dipped in water or a neutral detergent, do not use ordinary soap and detergent, and do not use decontamination. Powder, toilet detergent and other strong acid and alkali cleaning agent, this will corrode the profile surface, so as to ensure that the glass, frame and other parts are not scratched.
2: Clean the grooves and the slide rails at the junction of the sashes every three months to prevent dust, sand and stones from affecting the normal use of the hardware, and use a fur or vacuum cleaner for cleaning. After a rainy day, wet glass and door frames should be wiped out.
3: When cleaning aluminum doors and windows, do not step on the aluminum frame, and do not pull the frame for support. This makes it easy to wear out doors and windows or accidents on your own.
4: Every three months, check the hardware of broken aluminum windows and doors, aluminum wooden doors and windows, check the bolts, replace the damaged parts in time. Positioning pins, wind braces, floor springs and other vulnerable parts of aluminum alloy doors and windows, should be checked from time to time, regularly add oil to keep clean and flexible. Sealing tops and glass adhesives are the key structures that guarantee the insulation of aluminum doors and windows. If any, they must be repaired and replaced in time.
5: If the aluminum doors and windows are rusted due to oxidation, they can be scraped off with a small knife and then washed with soapy water, wiped dry with a dry cloth, marked with wax and then polished with a dry cloth. like New. The lubricant can be used every six months to lubricate the rotating, sliding and locking points of the hardware. It can be repeatedly opened and closed 3 to 5 times after dripping into the lubricant to ensure thorough lubrication and increase the flexibility and service life of the hardware turning mechanism.
6: In the use of aluminum doors and windows, the action should be light, push and pull along the way; find it difficult to hard pull hard push, should be troubleshooting. Ash, deformation is the main reason for the difficulty of sliding aluminum alloy doors and windows, to keep the door frame clean, especially the push-pull tank cleaning. Vacuum cleaner can be used to suck the dust in the groove and door seal tops.
The six rules of maintenance of aluminum doors and windows