Shangqiu Jinda Tools Co.,Ltd , https://www.jindameasur.com
1, after the card or ticket check, can not enter
Solution:
(1) Pedestrians might resist the lever during card swiping or ticket checking. Visitors are requested to step back and enter again.
(2) Please check if the electromagnet is normal. If the control part has an output voltage of the electromagnet and the voltage is normal, but the electromagnet cannot be sucked up, then the electromagnet can be changed.
2, swing up and down
Solution:
(1) The tray of the calibre dial is loose and the gap between the rims is too large.
(2) The tray screws are loose. Full height cross brake 3, there are some gates
Solution:
(1) The seat of the drop solenoid is not installed.
(2) Power supply problem, voltage is not enough.
4, the gate is powered off but not lost pole
Solution:
(1) Check if the electromagnet assembly seat is correct and the drop lever electromagnet bracket spring force is too small.
(2) The friction power of the turntable and the rotary lever is too large.
5, punching gate sometimes can not be smooth carding electronic factory anti-static special swing gate access control
Solution: Two pieces of iron with punching function gate inserts need to be polished to reduce the insertion resistance.
Three Roller Gate Common Problems and Solutions
Three Roller Gate Common Problems and Solutions