First, the ceiling project 1, paper gypsum board ceiling: the surface is uneven, there are cracks. Second, the ground engineering Third, the wall column facing project 1, natural stone: color, joints are uneven, not straight, uneven, surface texture is not smooth, cracking, bumping, pollution, shedding. IV. Door and Window Engineering Fifth, paint coatings 1, paint: paint dripping, paint film shrinkage, cracks, bite the bottom, paint film surface fog, paint film, foaming, trapping, wrinkling, the surface of the silk, color shades are different. 6, fine wood products <br> Cracking, warping, planing marks, joints are not strict, patchwork with black lines, color, pattern is not smooth, wooden screw caps askew, feel rough. Seventh, floral decoration <br>Incomplete, the pattern is not clear, the inside corner is not straight, the sun angle is not quite, the surface is perforated, the surface is rough, the joint is obvious, uneven, uneven, the overall decoration is uneven, the pattern is irregular, empty drum, Pollution, flash, edge, deformation, loose corners, not correct. Construction acceptance window paint switch marble cement floor tile glass brick glass sliding door glass door
Self drilling screw made of 410 stainless steel, high hardness (40 Rockwell C), steel process.
Drilling screw is also very strong hardness, compared to the ordinary screw up, not only to maintain the ability is good, the connection object effect is also very strong, for the performance of the screw, are generally does not need auxiliary processing, can be directly on the object directly drill a Kong Sue into objects, not just use rise very convenient, Also can greatly improve the efficiency of work. This kind of drilling screw can be said to be the first choice of workers in various fields.
So what is the use of drilling screws? Self drilling screw,hex Self drilling screw,truss Self drilling screw,flat Self drilling screw,pan Self drilling screw Shenzhen Lanejoy Technology Co.,LTD , https://www.wire-spring.com
2, mineral wool sound-absorbing board ceiling: bump, uneven, patchwork is not straight, lax, uneven seam, pollution, pattern asymmetry.
3, metal ceiling panels: color, surface roughness, seam warping, joints are not straight, bump.
4, plastic board: uneven, joints are not straight, strict, the border is not straight, not strict.
5, gypsum board: uneven, joints are not strict, not straight, uneven seam, the pattern is not clear, asymmetric.
6, ceiling keel: uneven, not straight, lax, not strong, uneven arch.
7, equipment installation port: Lax, incorrect, asymmetric, uneven arrangement, uneven intervals.
1, natural stone: color, joints lax, uneven surface texture, anti-flower, bump, poor mirror finish, pollution, uneven joints.
2, glazed tiles: bumps, color, glazed tiles cracks, uneven, joints are not strict, not straight, uneven, activities are not real, pollution.
3, cement surface: cracks, sub-grid moldings are not straight, incomplete display is not clear, hemiplegia, color, stone uneven distribution, color pollution, surface fade, poor surface finish.
4, artificial marble: uneven, warping, cracking, fade, fade, pattern is not smooth, seams are not straight and uneven.
5, wooden floor: color, joints are uneven, not straight, strict, cracks, warping, walking noise, the skirting board is not perpendicular to the ground, the surface is uneven, there are high and low levels.
6, plastic floor: the separation of the floor and the base layer bonding points, bubbling, staggered seams, patchwork, strict, not straight, fade, pollution, scratches, pattern asymmetry.
7, carpet: uneven, from the drums, wrinkles, inconsistent colors, flanging, curling and so on.
2, artificial stone: (1) artificial marble: uneven, warping, light, cracking, pattern is not smooth, joints are not straight and uneven.
(2) Prefabricated terrazzo: empty drums, uneven seams, color differences, uneven gaps, uneven distribution of stones.
3, glazed tiles: color, uneven, seams are not straight forward, uneven walls, cracks, discoloration, pollution.
4, wooden wall skirts: cracking, warping, scars, fragmentation, color, open plastic, blistering, wood grain asymmetry, scratches, open nails.
5, Bao Bu: uneven, bulging, wrinkling, radian uneven, squeezing not straight, pollution.
6, metal sheet: color, uneven, bump, from the drum, pollution, poor surface finish.
1. Aluminum alloy doors and windows: The position of doors and windows is inaccurate, there are no embedded sealant slots outside the door and window frames, cement mortar is used to caulk the perimeter of the window frame, the screws are not treated, and the outer wall pushes and pulls the slot water, and the joints are not vertical. , Angle is not square, push and pull is not smooth.
2, wooden doors and windows: door and window fan uneven, uneven seams, sash warping, frame is not square, box bending, hammer printing, cross stitch is not cross, switch is not working, walking fan, hinge slot is not uniform, hinge The location is different, the Screw is loose, the glued door leaf opens the glue, the hollow plywood door leaf is exposed and the door leaf is bulged.
3, plastic doors and windows: color, surface roughness, doors and windows fan corners, squareness, deformation, pollution, lax corners are not straight, the window frame is not filled with sealant around the perimeter, connecting screws directly into the window frame, the switch is not working , accessories quality.
4, color steel doors and windows: color, bump, switch is not working, uneven joints, door and window frames and sub-box without seals. 5, steel doors and windows: rough products, doors and windows frame is not square, warping, large joints, uneven, door and window fan deformation. The depth of the hardware screw is not enough, the switch is not working, and the overall size is too large.
6. Sliding door: Grinding between the door and the guide rail, grinding between the door and the door, poor hardware fittings, insufficient assembly precision, and damaged material surface.
7, even open the door: points too large, drooping doors, deformation, grinding door frame, the ground edging, the door uneven.
8, doors and windows: cracks, bubbles, ripples, uneven gaps.
2 Paint: Falling, brushing, bleeding, floating color, whitening, bite the bottom, wrinkles, pinholes, orange peel, blistering, rough coating, falling powder, no light, cracking, falling off, and back sticking.
1 stainless steel plate, metal plate, galvanized steel plate, engineering installation.
2 metal curtain wall metal light compartment and other indoor and outdoor installation.
General Angle steel, channel steel, iron plate and other metal materials combined installation.
4, automobile, container, shipbuilding, refrigeration equipment and other assembly projects.
Novice decoration guide: decoration acceptance reference points