The box should be fitted with a venting window on the side or end face near the upper frame. The number of louvers is determined by the volume of the package. The box frame material is yellow pine, the box board is made of water-resistant plywood, and the defects such as the frame yellow pine knots are inspected and treated, and then carefully dried manually to make the water content below 20%, so as not to be packaged. After the box, the weather humidity changes greatly and the joint cracking of the sheet material increases, which does not meet the requirements of the package. Compensation and disputes caused by damage during the transportation of the compressor waste a lot of time and expenses. In fact, many damages are caused by improper safety measures (fixed protection) in the transportation package, in order to prevent shock vibration during the transportation of the compressor. In the case of slip collision and overturning, it is necessary to fix the product parts on the base of the wooden box with safety fastening straps or chains, wooden blocks, fastening bolts, and the like. The following is the method of fixing the main components of the product on the base of the wooden box. The compressor body is bolted. That is, the body bolts are fixed on the sleepers of the package or directly fixed to the sliding wood by using the anchor bolt holes in the fuselage components. Due to the heavy weight of the fuselage components, in order to avoid the weight of the package from deviating significantly from the center of the package, it is not allowed to add other packages in addition to the maximum outer dimensions of the fuselage. The crankshaft is an important part of the compressor and has high manufacturing precision. Therefore, measures should be taken for the fastening part to avoid damage to important machining surfaces. The fastening method is shown in Figure 2. The connecting rods are stacked in pairs and fastened. The head is individually fastened and the fastening members are made of wooden members. High Transparency Self Adhesive Smart Film
High Transparency Switchable Smart Self-Adhesive Film Tint manufactured with a self-adhesive AB glue layer on one side which makes it easy to stick to both new and existing glass
A simple ON - OFF mode switches the film from being clear (transparent) to frosted (opaque). In its frosted state the film acts as an electronic blind providing privacy and security for any glass, window or partition.
Self-Adhesive Intelligent Smart Film is available in widths up to 1830mm and can be cut to any size and any special shape. Custom shapes and sizes are available and multiple pieces can be joined together to create large tempered panels or windows
High Transparency Self Adhesive Smart Film,High Technology Smart Window Film,Switchable Electric Glass Decorative Film,High Transparent Pdlc Switchable Glass Film Shenzhen YuGuang New Material Co.,Ltd , https://www.ygsmartfilm.com
Compressor body fastening method