Other Tools For Thread Insert,Helical Insert Removal Tools,Wire Thread Insert Insert Tools,Helical Insert Extraction Tool Shenyang Helisert Technology Co., Ltd , https://www.helisert.com
After the small backhoe loader operates, the oil temperature is high, and all operations must be replaced after the oil temperature drops.
Take off the oil container: minimum 45L capacity, refill volume: 45L.
1. Put the oil container under the oil drain bolt, remove the bolt, and put the oil. To prevent the oil in the tank of the small backhoe loader from suddenly flowing out, loosen the plug and gradually remove the bolt.
2. After the oil is drained, install it on the screw plug and tighten it.
3, the oil container is placed under the small backhoe loader gearbox oil filter.
4. Remove the oil filter plug of the small backhoe loader gearbox and tighten the screw plug after draining the oil.
5, remove the screw plug, cover, and remove the filter.
6, remove the dirt stuck on the filter of the small backhoe loader, and then use diesel or cleaning oil cleaning, such as filter damage, replace.
7. Reinstall the filter.
8. Inject a certain amount of oil through the filler port.
9, when refueling, check the oil level.
Replacement of the variable speed fuel tank with a small backhoe loader