Bridge Pier Construction Safety Requirements

(1) Prior to taking up posts, all technicians, construction workers, and service teams participating in high-altitude operations shall be organized to learn the safety operation knowledge and carry out specialized training; and the full-time safety personnel shall stratify and perform safety technical disclosure.
(2) Strict operating procedures shall be established. Operators must strictly observe their respective positions and must wear safety protective equipment as required. Take a safety rope when you are on duty and wear a safety helmet correctly.
(3) Safety fences shall be set around the construction platform. A closed safety net shall be provided below the platform, and ladders shall be provided on the upper and lower levels to facilitate the construction personnel to work from top to bottom. Special personnel are assigned to conduct regular and irregular inspections, and non-slip measures are taken on the sidewalk boards. The gangplank presses on the reinforcement and is bound together with the wire.
(4) When working alternately on the upper and lower floors, irons and tools should be prevented from falling. When the operating tool is not in use, it must be installed in a tool bag to prevent it from hurting people. Do not throw debris from high places.
(5) It is forbidden to stack heavy objects on the operation platform, and often check the hanging point position of the sliding frame, the safety of the hoisting wire rope and the chain block; whether the load-bearing components are stable and balanced, and ensure the safety.
(6) There must be full-time safety personnel on-site monitoring for the lifting operation. The operator must be a skilled worker and be trained in safety. On the spot, the management personnel unified the command.
(7) When the formwork is lifted and turned upside down, it should be stable and stable, balanced in place to prevent large swings and collisions. When the formwork is dismantled, it should be dismantled according to the level and order. The dismantled formwork should be piled up steadily, and it is forbidden to cause deformation due to the stacking weight.
(8) At night construction must ensure sufficient lighting, some work may not be carried out at night, such as lifting the carriage, lifting heavy components and so on.
(9) Construction shall be stopped when there is strong wind, heavy rain, lightning, snow and bad weather.

This article is a reprint of online media. It only represents the author's point of view. It has nothing to do with this site. If news articles and comments infringe your legal rights, please call us and we will handle it in a timely manner.