The steel pipe pillar structure is simple, the construction is convenient, the cost is reduced, and the work cycle is shortened. The lower steel pipe and the upper steel pipe are provided. The lower steel pipe is provided with a support base plate at a certain depth from the upper end. The diameter of the upper steel pipe is smaller than the diameter of the lower steel pipe. Steel Pipe,Steel Pipe For Subway,Carbon Steel Pipe,Construction Steel Pipe Anshan Lijian Engineering Group Co. LTD , https://www.lijianformwork.com
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131"; Home>Bearing knowledge>Characteristics of angular touch ball bearings Corner touch ball bearing features
The radial load and the axial load can be accepted together; the rotational speed is higher; the larger the touch angle is; the higher the axial load can be. The single row bearing can only accept the axial load in one direction; when receiving the radial load; the additional shaft will be caused It can only restrain the axial displacement of the shaft or the casing in one direction. If it is a pair of double joints; make the outer rings of a pair of bearings opposite; that is, the wide end faces the wide end face; the narrow end faces the narrow end face. Prevents the introduction of additional axial forces; and allows the shaft or housing to be constrained within the axial clearance in both directions. The angular touch ball bearing has a variant layout of up to 70 types. /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
1. The nominal touch angle is 15°, 25°, 40°; the larger the touch angle is, the higher the axial load can be. The high-precision and high-speed bearings usually take a 15° touch angle; under the axial force effect; the touch angle will Increase.
2, usually the inner ring or outer ring with lock; the inner and outer rings are not separated. After the outer ring is heated and expanded, the inner ring, the roll body and the cage assembly are installed. The number of balls is more than that of the deep groove ball bearing; The largest in the ball bearing; strong rigidity; work smoothly.
3, can use the inner and outer rings to adjust the radial clearance with each other. Always use the pair; and apply the preload; to improve the bearing rigidity.
Recommend to friends comments close window Bearing related knowledge The precision of the imported fine bearings and how to choose the imported bearings based on the conflicting torque. Is the sliding bearing?
What are the characteristics of the oscillating wear and temperature of IKO bearings and the countermeasures for the bearings, bearing seals and dust caps of imported bearings?
Common terms for bearings
This article links to http://
Please indicate China Bearing Network http://
Previous:Analysis of the five common causes of imported bearings, the next one: the combined needle roller bearing product density and production requirements
Corner touch ball bearing features
Source: Bearing network time: 2014-05-11