Screen replacement kit,Curtain Mosquito Nets,Curtain Mosquito Net Roll,Fiberglass Curtain Mosquito Jinwu Glass Fiber Co., Ltd , https://www.jinwuwindows.com
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131"; Home>Bearing knowledge>Protection of the extruder Puffing machine protection
/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
(1) The casing bearing should be filled with lubricating grease in time; after 500 hours of operation; replace the lubricating grease once. (The new machine should be used excessively before the operation of the machine; after 200 hours of operation, the oil should be changed.)
(2) Other bearing parts should be filled with grease regularly.
(3) The wearing parts such as screw and threaded sleeve are forbidden to use heavy hammer in the process of disassembly and assembly; it is forbidden to place heavy objects on the expansion chamber or standing. The imported pump valve (4) puffed material should be finished; beware of foreign objects such as metal entering the machine Damaged parts inside.
(5) Check the quality of the extruder at any time; pay attention to replacing the wearing parts.
(6) Adhere to the hygiene around the equipment.
(7) When it is not necessary to replace the bulking material for a long time; the material in the puffing chamber should be cleaned up; avoid agglomeration, mildew or material contamination between materials.
(8) Because the wearing parts near the discharge opening are relatively fast; the wearing parts close to one end of the feeding port are less worn; therefore, when replacing the wearing parts, it should be replaced sequentially from the beginning of the discharging end; Parts.
Recommend to friends comments close window Bearing related knowledge Jiuzhou eight types of bearing distribution: type of thrust ball bearing
PY160C motor grader transmission input bearing damage treatment without defects of the seat bearing protection process flow US company research and development of new metal seal drilling drill bit progress bearing life work bearing inspection matters
This article links to http://
Please indicate the bearing network http://
Previous:KYO bearing knowledge of temperature viewing Next: Analysis of repair problems of rolling bearings
Puffing machine protection
Source: China Bearing Network Time: 2013-06-24