When the sliding bearing is in operation, friction occurs due to the contact between the journal and the bearing bush, which causes the surface to heat up and wear and even “biteâ€. Therefore, when designing the bearing, the sliding bearing material with good friction reducing property should be used to manufacture the bearing bush, suitable lubricant. And use the appropriate supply method to improve the structure of the bearing to obtain thick film lubrication. 1. Corrugated surface corrosion: Spectral analysis found that the concentration of non-ferrous metal elements was abnormal; there were many sub-micron-scale wear particles of non-ferrous metal components in the spectrum; the moisture of the lubricating oil exceeded the standard and the acid value exceeded the standard. 2, the surface corrosion of the journal: Spectral analysis found that the concentration of iron is abnormal, there are many sub-micron particles of iron in the iron spectrum, and the moisture of the lubricating oil exceeds the standard or the acid value exceeds the standard. 3, the surface of the journal is strained: there are iron-based abrasive grains or black oxide particles in the iron spectrum, and there is tempering color on the metal surface. 4, fretting wear behind the tile: spectral analysis found that the iron concentration is abnormal, there are many iron components in the iron spectrum sub-micron wear particles, lubricating oil moisture and acid value is abnormal. 5, bearing surface strain: found in the iron spectrum cutting abrasive particles, abrasive particles are non-ferrous metals. 6, tile surface peeling: found in the iron spectrum there are many large-scale fatigue spalling alloy wear particles, layered abrasive particles. 7, bearing burning tile: There are more large-sized alloy abrasive grains and black metal oxide in the iron spectrum. 8, bearing wear: due to the metal characteristics of the shaft (high hardness, poor retractability) and other reasons, easy to cause adhesive wear, abrasive wear, fatigue wear, fretting wear and other conditions. * Plate FLANGE (Plate Flange, Flat Flange, Plain Flange) Backing Flanges,Backing Ring,Ring Flange, Backing Ring Flanges Shandong Zhongnuo Heavy Industry Co.,Ltd. , https://www.znforged.com
* SLIP ON FLANGE (SORF SOFF FLANGE)
* WELDING NECK FLANGE (WNRF FLANGE)
* BLANK FLANGE (BLIND FLANGE, BLFF FLANGE, BLRF FLANGE)
* THREADED FLANGE (SCREWED FLANGE)
*BACKING RING FLANGE
Main fault of sliding bearing