Yucheng Weisite Measuring Tools Co., Ltd , https://www.wsttools.com
KCB stainless steel gear pump material: 304.316.316L stainless steel
KCB stainless steel gear pump material: 304.316.316L stainless steel KCB stainless steel gear pump, the pump has a well-designed drain and return sump, the gear in the work to withstand the torque of the smallest, so the bearing load, wear small, high pump efficiency. KCB stainless steel gear pump is mainly composed of gear, shaft, pump body, safety valve and shaft end seal. The gear has high hardness and strength after heat treatment and is installed in the replaceable sleeve together with the shaft. Of the lubrication are automatically achieved when the pump is working with the output medium. Note that the safety valve can not be used for long-term work of the valve, if necessary, can be separately installed in the pipeline from the spindle extension to the pump, clockwise rotation. KCB stainless steel gear pump gear, shaft, pump body, safety valve, shaft seal composed of the end. The gears are heat-treated to a higher hardness and strength and mounted with the shaft in a replaceable hub. The lubrication of all parts in the pump is automatically achieved using the output medium while the pump is in operation. The pump has a well-designed drain and return tank, the gear torque in the work to bear the smallest, so the bearing load, wear a small, high pump efficiency. KCB stainless steel gear pump with safety valve as overload protection, safety valve full back pressure of the pump rated exclusion pressure of 1.5 times, but also allows the discharge pressure within the scope of the actual need to be adjusted. But note that the safety valve can not be used for long-term work of the valve, if necessary, can be installed separately in the pipeline. KCB stainless steel gear pump is mainly used for conveying lubricating oil in the lubrication system of various machinery and equipment. It is suitable for conveying the oil with the viscosity of 5 × 10-6 ~ 1.5 × 10-3m2 / s (5-1500cSt) and the temperature below 300 ℃ Lubricating oil. Stainless steel gear pump, can deliver non-lubricating oil, beverage, low corrosive liquids. Equipped with copper gear can deliver low-point liquid, such as gasoline, benzene and so on. In addition to this series of stainless steel pump configuration common motor, but also according to user needs with the specifications of the explosion-proof motor configuration. Material: 304.316.316L stainless steel. From the spindle extension to the pump to see, clockwise rotation. Flow: 1.1m3 / h-600m3 / h Pressure: 0.28MPa - 2.5MPa Mainly used in oil, oil depots, ports, terminals, ships and other large flow oil, unloading!