There is a problem: 1. The main reason is that there are too many line connectors and the connectors are handled improperly. Some lines are too long. Some joints will be produced during the electrician's operation. However, due to technical limitations of some of the construction team's electricians, the wiring, insulation, and moisture-proof treatment of joints are not good, and disconnection, short circuit, etc. will occur. 2. To cut down on costs and cut corners, there is no casing for the concealed lines. 3. The completed line was damaged by subsequent construction. If the wall line is interrupted by an electric hammer and the floor is paved, the air nail gun penetrates the PVC pipe or sheath wire. 4. Distribution lines do not consider different rated wires have different rated currents. “Little Marathon†causes long-term overload of the line itself. 5, all kinds of different lines go the same line. If the television antenna, the telephone line and the distribution line are threaded into the same casing, the reception of the television and the telephone is disturbed. TV entrance decoration TV decoration home improvement Holster Measuring Tape,Steel Tape Measure With Self-Locking,Steel Tape Measure With Magnet,Steel Tape Measure With Abs Shangqiu Jinda Tools Co.,Ltd , https://www.jindameasur.com
Indoor circuit construction should pay attention to details
In the home decoration of the electrician series, electric construction seems to live a lot on the surface, but many potential problems leave many hidden dangers for the future life. The common problems are: short circuit of the distribution line, weak television signal, and interference from telephone reception.