Socket Welding Floor Flange,Socket Weld Flange,En1092-1 Flange,Socket Welding Square Flange Jinan Xintai Forging Co., Ltd , https://www.xtdzflange.com
Second, add water to promote maturity. Dry in winter, large amount of evaporation, if the water is insufficient, the microbial activity is inhibited, and the straw inside the compost is not easy to rot. In the process of stacking, water manure or sewage is often added to make the material in the pile swell and promote microbial activity. Fermented and decomposed. It is more appropriate to use the bottom of the pile to produce moisture when composting and adding water.
Third, turn piles to promote uniformity. Winter composting needs to be turned 2-3 times during the stacking period, and each time of turning over the pile should be mastered within a few days after the high temperature in the pile. And add manure, sewage, human and animal waste. When turning over, turn the piles on the top and the surrounding into the pile, and turn the piles in the original pile out of the surrounding and cover the upper layer, so that all the compost materials are evenly rotted.
Fourth, the application method. The completely composted compost is generally brown. All the materials have been rotted and stinky. They are rich in organic matter, high in fertility and long in fertilizer. In the coming spring, they can be used as base fertilizer. The application method can be applied as a strip or acupoint, and the dosage is 2000-2500 kg. It can also be spread evenly on the ground before tilling, then turned into the soil, and then evenly spread through the hoe or the field to make fertilizer and soil. Integration, reducing the loss of fertilizer, improving soil fertility, and laying a good foundation for the harvest of crops.
Winter crop straw stacking method
First, the stacking method. The ground composting should be selected in the leeward sunny place. When stacking, the ground should be leveled and ground, and a layer of 3-4 inch thick dry pond mud or dry fine soil should be laid to absorb the oozing fertilizer. Spread a layer of broken short straw, garbage, weeds, etc., thick 25-30 cm, and mix some manure and feces, then spread about 2% -3% of the raw material lime, splashing manure, sewage and other liquid fertilizer The upper pavement is about 7 cm thick with thin pond mud, ditch mud or broken soil. After that, the raw materials are repeatedly added in sequence, and piled up layer by layer. The stack height is about 2 meters and the width is 3 meters. The length depends on the material. When stacking, the lower layer should be looser, and the upper layer should be pressed tightly one by one. In this way, the permeability conditions are good, perishable, and the fat is easy to store and is not easy to lose. After stacking, use the mud or mud paste to reduce the evaporation of water, facilitate the heating and heating in the heap, ferment and decompose. In order to facilitate the ventilation and water addition, the straw is stalked and grown 2 meters, about 10 cm thick. The beam bundle is erected from the bottom up every 1 meter as a stomata, and can be poured into the pores when the water or liquid fertilizer is added later.
ã€Comment】 ã€Print this article】 ã€Close this page】 ã€Large, medium and small】