Dimming glass can be made into curved glass, flat glass and arc glass. Intelligent dimming film has non-polar control glass transmittance (transmittance more than 84%), temperature resistance (-40℃~120℃), ultra-thin (only 0.06mm), ultra-low voltage (power supply voltage 2V ~ 36V), high standard (mobile phone industry double 75), convenient (size can be arbitrarily cut, no edge sealing), easy installation (belongs to self-adhesive film. Glass partition with a sense of science and technology, changeable louver dimming glass will be a good choice. In the Internet of everything era, the control of glass can also be connected to the control system of the whole space to achieve convenient and intelligent control. Self-adhesive dimming film turns bulletproof glass of bank counters into dimming glass. The higher the transmittance of PDLC dimming glass, the better the visual effect. The visual effect is also affected by fog, the higher the fog, the glass will still look a bit foggy even though the transmittance is the same. Silent Glass, Restaurant Room Glass, SPD Smart Glass, Smart Dimming Glass, KTV Room Glass Tianqixun Technology , https://www.tqxdisplay.com
Wire retaining ring installation tool
In the daily production process, the wire retaining ring is equipped with a screwdriver to pry open or squeeze the retaining ring, and at the same time use other tools to press the retaining ring into the part to be fitted with the retaining ring. If you encounter a two-person ring with a large wire diameter, this method is laborious and laborious, and it is easy to scratch your hands and feet, and even cause accidents and waste. For this reason, we designed and manufactured the wire as shown. Retaining ring installation tool. When using, first place the centering cone 6 into the workpiece hole of the ring to be installed, then put the retaining ring 5 on the centering cone 6, and rotate the adjusting nut 2 to make the three claws 4 large. To the desired position, against the retaining ring 5, in the handle