LED Sensor Batten Lights has options of microwave sensor and infrared sensor. There are two sensing modes. One is 0-10v dimming, and the other is on/off.
Toggle button can set the remote distance of remote control and sensor.
If you need sensor lights in factories or warehouses, corridors, or other indoors, you can choose this LED Sensor batten lights. If you need IP66 sensor light, you can choose Sensor Waterproof Light.
Motion Sensor Led Light,Sensor Led Light,Motion Sensor with Led Light,Led Light Motion Sensor SHENZHEN LITEHOME OPTOELECTRONIC TECHNOLOGY CO., LTD. , https://www.litehomelights.com
The XE40 remote-controlled hydraulic excavator has an effective remote control range of up to 100 meters. It operates around the clock and is not affected by the external environment. At the same time, a number of new features have been developed and designed for the first time in this model, such as horizontal tilt angle limitation, swiveling centering, learning and reset functions, work device pressure sensing, and automatic adjustment of pilot flow, etc., making the mini excavator flexible and electronic The intelligent control set of the control system is integrated, with the advantages of a composite type of function.
The main difference between these two modes is that the 0-10v dimming mode can set the brightness of the light after the person walks, and the pending time of this brightness can also be set. On/off mode, you can only set the time for the lights to turn off after a person walks, but not the brightness (that is, functions 3, 4 cannot be implemented). The 0-10v dimming mode is more intelligent.
Briefly introduce the function of sensor light:
1. Set up daylight threshold: If the ambient light is higher than the set brightness, the sensing function will not be triggered.
2. Set up the hold time: The time for the light to maintain brightness after the person walks away.
3. Set up a stand-by dim level: set the brightness maintained after the person walks
4. Set up stand-by time: After the person walks, the time to maintain low brightness
5. Set up detection area: Set the detection area.
Xugong's first remote-controlled hydraulic excavator successfully trial production successful
Recently, Xugong's first XE40 remote-controlled hydraulic excavator was successfully completed by Xugong excavator company, indicating that Xugong excavator has entered a new phase of electronic control. Under certain special conditions, the use of remote control to remotely control the excavation and mining of excavators can greatly improve the operator's safety factor and improve work efficiency.