Mechanical processing specific treatment principle

(1) In order to ensure the processing accuracy, the roughing and finishing are preferably carried out separately. Because of the large amount of cutting during roughing, the cutting force and clamping force of the workpiece are large, the heat is generated, and the machining surface has a significant work hardening phenomenon. There is a large internal stress inside the workpiece. If rough and rough machining Continuously, the precision of the finished part will be quickly lost due to the redistribution of stress. For some parts with high machining accuracy requirements. After roughing and prior to finishing, a low temperature annealing or aging treatment should be arranged to eliminate internal stresses.

(2) Reasonable selection of equipment. Roughing is mainly to cut off most of the machining allowance, and does not require high machining accuracy. Therefore, roughing should be carried out on machine tools with high power and low precision. The finishing process requires higher precision. Machine tool processing. The roughing and finishing are processed on different machine tools, which can fully utilize the equipment capacity and extend the service life of the precision machine tool.

(3) In the machining process route, a heat treatment process is often arranged. The arrangement of the heat treatment process is as follows: in order to improve the cutting performance of the metal, such as annealing, normalizing, quenching and tempering, etc., it is generally arranged before the machining. In order to eliminate internal stress, such as aging treatment, quenching and tempering treatment, etc., it is generally arranged after roughing and before finishing. In order to improve the mechanical properties of the parts, such as carburizing, quenching, tempering, etc., it is generally arranged after the machining. If there is a large deformation after heat treatment, the final processing procedure must be arranged.

Stainless Steel Barbecue Grill

Barbecue wire Grill Grate is made of high quality 304 stainless steel, never rusting and durable. BBQ Wire mesh does not have any coating or chemical ingredients, making food safer.
Multi-functional Grill Cooking Grid Grate: This wire mesh is mainly used for BBQ Grill Mat for outdoor cooking, it can also be used as a cooling and baking rack. Or you can develop other uses for it.

grill wire mesh,Stainless Steel BBQ Grill Mesh,steel wire BBQ mesh,cooking grid

Shenzhen Lanejoy Technology Co.,LTD , https://www.szlanejoy.com