Shower Door Seal,Door Side Seal,Waterproof Shower Seal Belyn Hardware Factory , http://www.xy-hardware.com
WPR single-blade finishing tool is a high-precision mold making tool produced by LMT Kieninger, which belongs to the ball cutter. The tool is a single-blade clip-on tool that is more economical than a one-piece tool. After the tool is scrapped, it is only necessary to replace the blade, no need to replace the tool bar; if the blade is lightly damaged, it can be reground and recoated. At the same time, under the same size and the same processing conditions, it has a slightly higher feed per tooth than the integral tool, that is, it has higher processing efficiency. WPR single-blade finishing tools use machine-clamp milling cutters, and provide a wide range of inserts and a variety of groove shapes, to meet different processing stages of different levels of customers, unique single screw tightening and two-point positioning of the blade, greatly Improve tool machining accuracy.
WPR single-blade finishing knives are available in two sizes: carbide shank and steel shank. The carbide shank has better processing stability than the steel shank and higher rounding accuracy, but the price is relatively expensive, which is just complementary to the steel shank to meet the processing needs of different levels of customers. . The arbor diameter ranges from 6 to 32 mm. Each diameter of the arbor has 2 to 3 lengths. There are 4 types of shank designs, which are straight shank, taper shank, Mo shank and threaded screw. formula.
Whether it is a carbide shank or a steel shank, the shank has a manufacturing tolerance of h6 and can be used with a thermal expansion and contraction shank. The shank with a diameter of more than 10mm is also available with and without internal cooling. It is suitable for compressed air cooling, spray cooling and coolant cooling, which increases productivity, increases tool life and improves workpiece surface quality.
Jinnaji develops new WPR single-blade finishing tool
LMT Kieninger's precision mold making tool - WPR single-blade finishing tool. The tool adopts a clamp-type milling cutter and provides a wide range of inserts and a variety of groove shapes to meet different processing stages of different levels of customers. Unique single screw tightening and two-point positioning of the blade greatly improve tool processing. Precision.