5052 H32 Tube Aluminium in Aluminum Suppliers with Mill Surface

Model NO.: 5052 h32
Thickness: 0.1-200mm
Length: 500-6000mm
Surface: Mill Surface; Anodized;Color Coated
Process: Cold Drawn;Extruded;Forged
Trademark: ZYTC
Transport Package: Woodern Box
Origin: China
HS Code: 7608201090
Model NO.: 5052 h32
Thickness: 0.1-200mm
Length: 500-6000mm
Surface: Mill Surface; Anodized;Color Coated
Process: Cold Drawn;Extruded;Forged
Trademark: ZYTC
Transport Package: Woodern Box
Origin: China
HS Code: 7608201090
5052 Aluminum Description
    5052 aluminum tube: 5052 aluminum tube for the AL-Mg alloy aluminum plate, is the most widely used a rust-proof aluminum, this alloy of high strength, especially with anti-fatigue strength: plastic and high corrosion resistance, can not heat treatment , In the semi-cold hardening when the plastic is still good, cold hardening when the plastic low, good corrosion resistance, good weldability, cutting performance can be poor, can be polished.
    5052 Aluminum applications are mainly used for low load parts requiring high plasticity and good weldability, working in liquid or gaseous media, such as fuel tanks, petrol or lubricating oil conduits, various liquid containers and other small loads made with deep drawing Parts: wire used to do rivets. Also used in traffic vehicles, ship's sheet metal parts, instrumentation, street lamp bracket and rivets, metal products, electrical shell, and so on.
  Si Fe Cu Mn Mg Cr Zn Ti other
5052 0.25 0.40 0.10 0.10 2.2-2.8 0.15-0.35 0.1 - 0.15
5083 0.4-0.7 0.40 0.10 0.1-0.4 4.0-4.9 0.05-0.25 0.25 0.15 0.15
5086 0.40 0.50 0.10 0.2-0.7 3.5-4.5 0.05-0.25 0.25 0.15 0.15
5754 0.40 0.40 0.10 0.50 2.6-3.6 0.30 0.20 0.15 0.15
 5052 H32 Tube Aluminium in Aluminum Suppliers with Mill Surface
Product Description
1. 5052 H32 Tube Aluminium/Aluminum Tube in Aluminum Suppliers
2. Standard: ASTM B209-04,B210M-05,B234M-04,B241-02,B221M-05a, AISI, SUS, EN 573-3-2003, JIS H4000-2006,H4080-2006,H4040-2006, 
3. Size: Outer Diameter10mm-500mm
         Wallthickness:1mm--50mm
4.Length: 100/1000/2000/4000/6000mm, or other length as you requirements.
5.Surface: mill surface; anodizing surface; polished surface; powder coated surface; colorful anodizing surface
6.Process:heat extrusion,cold drawn,welding, seamless
Product Range
Material Grade we have  
1)1000series/Pure Aluminum/Pure Aluminium:1050,1060,1070,1080,1100,1350,etc
2)2000series/Hard Aluminum/Hard Aluminium/Aluminum-Copper Alloy/ Aluminium-Copper Alloy:2011,2014,2017,2024,etc
3)3000series/ Rust-Proof Aluminum/Rust-Proof Aluminium/ Aluminum-Manganese Alloy:3002,3003,3104,3204,3030,etc
4)5000series/ Rust-Proof Aluminum/Rust-Proof Aluminium /Aluminum-Magnesium Alloy:5005,5025,5052,5040,5054,5056,5083,5152,etc
5)6000series / Aluminum-Magnesium-Silicon Alloy /Aluminium-Magnesium-Silicon Alloy /:6101,6003,6061,6063,6020,6201,6262,6082,etc
6)7000series/ Aluminum-Zinc Alloy/ Aluminium-Zinc Alloy:7003,7005,7050,7075,etc
7)8000series:8011,etc
Applications for industrial :
1.Industrial hydraulic
2.Automobile industry
3.Industrial machinery industry
4.Industrial automation
5.Rail transit
6.Heat exchange
7.Seamless pipe
8.Decoration works
9.Others
Packing
Standard export packing, or as the customers' requirement.
5052 H32 Tube Aluminium in Aluminum Suppliers with Mill Surface
Why choose us?
     Our company established in 2004.More than 10 years of development,we become the leader in north China market in metal material products.We have more than 1000 tons of perennial stock.
What is our customer base?
     Our customers are located in more than 80 countries and regions around the world,especially in the Middle East,Southeast Asia,South America,North America,Australia,Eastern Europe,Nordic has long-term stability of customers.
What is our advantage?
     We have high quality products and professional services. Our products after SGS,BV,ISO certification. Our salesman has more than five years of experience.
What is the delivery time?
     If we have stock, usually the delivery time is about 10-20 working days. If your products need to be produced, the delivery time is about 30 working days or 45 working days, or according to the factory arrangement.
Why does aluminum have strong antioxidant?
    In fact, aluminum is easily oxidized, the reason why the oxidation, because the surface of the dense Al2O3, the formation of a good protective film, making the elemental Al isolated from the air, reflecting a strong antioxidant.
Aluminum& Aluminum Alloy in Different Country
  CHINA USA UK JAPAN FRANCE GERMANY The former SU
  GB ASTM BS JIS NF DIN ГОСТ
Industrial pure aluminum 1A99 1199       A199.99R A99
1A97         A199.98R A97
1A95           A95
1A80   1080(1A) 1080 1080A A199.90 A8
1A50 1050 1050(1B) 1050 1050A A199.50 A5
Rust-proof aluminum 5A02 5052 NS4 5052 5052 A1Mg2.5 Amg
5A03   NS5       AMg3
5A05 5056 NB6 5056   A1Mg5 AMg5V
5A30 5456 NG61 5556 5957    
Hard aluminum 2A01 2036   2117 2117 AlCu2.5Mg0.5 D18
2A11   HF15 2017 2017S AlCuMg1 D1 
2A12 2124   2024 2024 AlCuMg2 D16AVTV
2B16 2319          
Forging aluminum 2A80     2N01     AK4
2A90 2218   2018     AK2
2A14 2014   2014 2014 AlCuSiMn AK8
Super hard aluminum 7A09 7175   7075 7075 AlZnMgCu1.5 V95P
  ZAlSi7Mn 356.2 LM25 AC4C   G-AlSi7Mg  
Cast aluminum ZAlSi12 413.2 LM6 AC3A A-S12-Y4 G-Al12 AL2
 
Aluminum alloy
 		 ZAlSi5Cu1Mg 355.2         AL5
ZAlSi2Cu2Mg1 413   AC8A   G-Al12(Cu)  
ZAlCu5Mn           AL19
ZAlCu5MnCdVA 201          
ZAlMg10 520.2 LM10   AG11 G-AlMg10 AL8
ZAlMg5Si         G-AlMg5Si AL13
 
5052 Aluminum Description
    5052 aluminum tube: 5052 aluminum tube for the AL-Mg alloy aluminum plate, is the most widely used a rust-proof aluminum, this alloy of high strength, especially with anti-fatigue strength: plastic and high corrosion resistance, can not heat treatment , In the semi-cold hardening when the plastic is still good, cold hardening when the plastic low, good corrosion resistance, good weldability, cutting performance can be poor, can be polished.
    5052 Aluminum applications are mainly used for low load parts requiring high plasticity and good weldability, working in liquid or gaseous media, such as fuel tanks, petrol or lubricating oil conduits, various liquid containers and other small loads made with deep drawing Parts: wire used to do rivets. Also used in traffic vehicles, ship's sheet metal parts, instrumentation, street lamp bracket and rivets, metal products, electrical shell, and so on.
  Si Fe Cu Mn Mg Cr Zn Ti other
5052 0.25 0.40 0.10 0.10 2.2-2.8 0.15-0.35 0.1 - 0.15
5083 0.4-0.7 0.40 0.10 0.1-0.4 4.0-4.9 0.05-0.25 0.25 0.15 0.15
5086 0.40 0.50 0.10 0.2-0.7 3.5-4.5 0.05-0.25 0.25 0.15 0.15
5754 0.40 0.40 0.10 0.50 2.6-3.6 0.30 0.20 0.15 0.15
 5052 H32 Tube Aluminium in Aluminum Suppliers with Mill Surface
Product Description
1. 5052 H32 Tube Aluminium/Aluminum Tube in Aluminum Suppliers
2. Standard: ASTM B209-04,B210M-05,B234M-04,B241-02,B221M-05a, AISI, SUS, EN 573-3-2003, JIS H4000-2006,H4080-2006,H4040-2006, 
3. Size: Outer Diameter10mm-500mm
         Wallthickness:1mm--50mm
4.Length: 100/1000/2000/4000/6000mm, or other length as you requirements.
5.Surface: mill surface; anodizing surface; polished surface; powder coated surface; colorful anodizing surface
6.Process:heat extrusion,cold drawn,welding, seamless
Product Range
Material Grade we have  
1)1000series/Pure Aluminum/Pure Aluminium:1050,1060,1070,1080,1100,1350,etc
2)2000series/Hard Aluminum/Hard Aluminium/Aluminum-Copper Alloy/ Aluminium-Copper Alloy:2011,2014,2017,2024,etc
3)3000series/ Rust-Proof Aluminum/Rust-Proof Aluminium/ Aluminum-Manganese Alloy:3002,3003,3104,3204,3030,etc
4)5000series/ Rust-Proof Aluminum/Rust-Proof Aluminium /Aluminum-Magnesium Alloy:5005,5025,5052,5040,5054,5056,5083,5152,etc
5)6000series / Aluminum-Magnesium-Silicon Alloy /Aluminium-Magnesium-Silicon Alloy /:6101,6003,6061,6063,6020,6201,6262,6082,etc
6)7000series/ Aluminum-Zinc Alloy/ Aluminium-Zinc Alloy:7003,7005,7050,7075,etc
7)8000series:8011,etc
Applications for industrial :
1.Industrial hydraulic
2.Automobile industry
3.Industrial machinery industry
4.Industrial automation
5.Rail transit
6.Heat exchange
7.Seamless pipe
8.Decoration works
9.Others
Packing
Standard export packing, or as the customers' requirement.
5052 H32 Tube Aluminium in Aluminum Suppliers with Mill Surface
Why choose us?
     Our company established in 2004.More than 10 years of development,we become the leader in north China market in metal material products.We have more than 1000 tons of perennial stock.
What is our customer base?
     Our customers are located in more than 80 countries and regions around the world,especially in the Middle East,Southeast Asia,South America,North America,Australia,Eastern Europe,Nordic has long-term stability of customers.
What is our advantage?
     We have high quality products and professional services. Our products after SGS,BV,ISO certification. Our salesman has more than five years of experience.
What is the delivery time?
     If we have stock, usually the delivery time is about 10-20 working days. If your products need to be produced, the delivery time is about 30 working days or 45 working days, or according to the factory arrangement.
Why does aluminum have strong antioxidant?
    In fact, aluminum is easily oxidized, the reason why the oxidation, because the surface of the dense Al2O3, the formation of a good protective film, making the elemental Al isolated from the air, reflecting a strong antioxidant.
Aluminum& Aluminum Alloy in Different Country
  CHINA USA UK JAPAN FRANCE GERMANY The former SU
  GB ASTM BS JIS NF DIN ГОСТ
Industrial pure aluminum 1A99 1199       A199.99R A99
1A97         A199.98R A97
1A95           A95
1A80   1080(1A) 1080 1080A A199.90 A8
1A50 1050 1050(1B) 1050 1050A Sds Drill Bits

SDS Plus and SDS Max drill bits can be used for drilling operations in concrete, reinforced concrete, granite and similar materials. SDS-Plus has a drilling diameter of 4mm to 32mm and a drilling depth of 110mm to 1000mm; SDS-Max has a drilling diameter of 12mm to 52mm and a drilling depth of up to 1200mm.

SDS Drill Bits are available with two (properly shaped integral straight edges), three (star arrangement) or four (integral cross arrangement) inserts, made of cemented carbide. They are deeply embedded in the steel head with industrial solder and are characterized by a high degree of mechanical and heat resistance.

SDS Plus and SDS Max Bits should not only be selected based on the diameter of the drilled hole, but also their depth standard. Both of these measures are necessary to maximize productivity.

Sds Drill Bits,High Carbon Steel Drill Bits,Concrete Drill Bit,Flat Hammer Drill Bits

Danyang Yongshun Tools Co.,Ltd , https://www.ysdrillbitset.com