ASME SA179 Cold Drawn Low Carbon Seamless Steel Pipe for Heat Exchanger and Condenser

Model NO.: IR-B steel pipe
Size: 20mm~114mm
Wall Thickness: 1mm~8mm
Length: Fixed Length, by Random
Surface: Bare Pipe, Anti-Rust Painting
End Processing: Plain Ends, Bevel Ends with End Caps
Trademark: Iron&steel
Transport Package: Standard Seaworthy Packing
Specification: ASME
Origin: China
HS Code: 73045910
Model NO.: IR-B steel pipe
Size: 20mm~114mm
Wall Thickness: 1mm~8mm
Length: Fixed Length, by Random
Surface: Bare Pipe, Anti-Rust Painting
End Processing: Plain Ends, Bevel Ends with End Caps
Trademark: Iron&steel
Transport Package: Standard Seaworthy Packing
Specification: ASME
Origin: China
HS Code: 73045910
Outer diameter: 20mm~114mm
Wall thickness: 1mm~10mm
Length: 6meters, 12meters, by random
Specifications of ma}or steel:
10,20,20G,20MnG,25MnG,15CrMoG,12Cr2MoG,12Cr1MoVG,12Cr2MoWVTiB,10Cr9Mo1VNb,SA210A1,SA210C,SA213 T11,SA213 T12,SA213 T22,SA213 T23,SA213 T91,SA213 T92,ST45.8/III,15Mo3,13CrMo44,10CrMo910etc.
Small Calibers Seamless steel tubes for high(low and medium) pressure boilers and petrochemical industry
Standards:
ASME SA 179,
ASME SA 192
DINl7175 Deutsches industrial standard~
ASME SA179 Cold Drawn Low Carbon Seamless Steel Pipe for Heat Exchanger and Condenser
ASME SA179 Cold Drawn Low Carbon Seamless Steel Pipe for Heat Exchanger and Condenser
ASME SA179 Cold Drawn Low Carbon Seamless Steel Pipe for Heat Exchanger and Condenser


Application:
Used as the pipes on the heated side of low and medium pressure boilers(normally with operating pressure not higher than 5.88Mpa and
operating temperature below 450 oc);as the pipes on the heated sides of high·pressure boilers,economizers,overheaters,reheaters and pipes
for petrochemical industry(with the operating pressure above 9.8Mpa and operating temperature ranging between 450~C~650~C1

Diamensional tolerances:
Types of steel tubes Outer diameters Wall thickness
Cold-rolled tubes Tube sizes(mm) Tolerances(mm) Tube sizes (mm) Tolerances(mm)
>30~50 ±0.3 >3~20 ±10%

 

Mechanical properties:
Standard codes Models of steel tubes Tensite strength(MPa) Yield strength(MPa) Elongation(%) Hardness
GB3087 10 335~475 ≥195 ≥24 /
20 410~550 ≥245 ≥20 /
GB5310 20G 410~550 ≥245 ≥24 /
20MnG ≥415 ≥240 ≥22 /
25MnG ≥485 ≥275 ≥20 /
15CrMoG 440~640 ≥235 ≥21 /
12Cr2MoG 450~600 ≥280 ≥20 /
12Cr1MoVG 470~640 ≥255 ≥21 /
12Cr2MoWVTiB 540~735 ≥345 ≥18 /
10Cr9Mo1VNb ≥585 ≥415 ≥20 /
ASME SA210 SA210A-1 ≥415 ≥255 ≥30 ≤143HB
SA210C ≥485 ≥275 ≥30 ≤179HB
ASME SA213 SA213 T11 ≥415 ≥205 ≥30 ≤163HB
SA213 T12 ≥415 ≥220 ≥30 ≤163HB
SA213 T22 ≥415 ≥205 ≥30 ≤163HB
SA213 T23 ≥510 ≥400 ≥20 ≤220HB
SA213 T91 ≥585 ≥415 ≥20 ≤250HB
SA213 T92 ≥620 ≥440 ≥20 ≤250HB
DIN17175 ST45.8/III 410~530 ≥255 ≥21 /
15Mo3 450~600 ≥270 ≥22 /
13CrMo44 440~590 ≥290 ≥22 /
10CrMo910 480~630 ≥280 ≥20 /

 ASME SA179 Cold Drawn Low Carbon Seamless Steel Pipe for Heat Exchanger and Condenser

Chemical composition:
Standard codes Models of steel tubes Chemical compositions(%)
C Si Mn P S Cr Mo Cu Ni V Al W Ti Nb N
GB3087 10 0.07~0.13 0.17~0.37 0.38~0.65 ≤0.030 ≤0.030 0.3~0.65 / ≤0.25 ≤0.30 / /        
20 0.17~0.23 0.17~0.37 0.38~0.65 ≤0.030 ≤0.030 0.3~0.65 / ≤0.25 ≤0.30 / /        
GB5310 20G 0.17~0.24 0.17~0.37 0.35~0.65 ≤0.030 ≤0.030 ≤0.25 ≤0.15 ≤0.20 ≤0.25 ≤0.08          
20MnG 0.17~0.24 0.17~0.37 0.70~1.00 ≤0.030 ≤0.030 ≤0.25 ≤0.15 ≤0.20 ≤0.25 ≤0.08          
25MnG 0.18~0.24 0.17~0.37 0.80~1.10 ≤0.030 ≤0.030 ≤0.25 ≤0.15 ≤0.20 ≤0.25 ≤0.08          
15CrMo 0.12~0.18 0.17~0.37 0.40~0.70 ≤0.030 ≤0.030 0.80~1.10 0.40~0.55 ≤0.20 ≤0.30            
12Cr2MoG 0.08~0.15 ≤0.50 0.40~0.70 ≤0.030 ≤0.030 2.00~2.50 0.90~1.20 ≤0.20 ≤0.30            
12Cr1MoV 0.08~0.15 0.17~0.37 0.40~0.70 ≤0.030 ≤0.030 0.90~1.20 0.25~0.35 ≤0.20 ≤0.30 0.15~0.30          
12Cr2MoWVTiB 0.08~0.15 0.45~0.75 0.45~0.65 ≤0.030 ≤0.030 1.60~2.10 0.50~0.65 ≤0.20 ≤0.30 0.28~0.42   0.30~0.55 0.08~0.15 B 0.002~0.008  
10Cr9Mo1VNb 0.08~0.12 0.20~0.50 0.30~0.60 ≤0.020 ≤0.010 8.00~9.50 0.85~1.05 ≤0.20 ≤0.40 0.18~0.25 ≤0.015     0.06~0.10 0.03~0.07
ASME SA210 SA210A-1 0.13~0.19 ≥0.1 0.45~0.65 ≤0.030 ≤0.030                    
SA210C 0.18~0.24 ≥0.1 0.80~1.10 ≤0.030 ≤0.030                    
ASME SA213 SA213 T11 0.05~0.15 0.50~1.0 0.30~0.60 ≤0.030 ≤0.030 1.00~1.50 0.50~1.00                
SA213 T12 0.05~0.15 ≤0.50 0.30~0.61 ≤0.030 ≤0.030 0.80~1.25 0.44~0.65                
SA213 T22 0.05~0.15 ≤0.50 0.30~0.60 ≤0.030 ≤0.010 1.90~2.60 0.87~1.13                
SA213 T23 0.04~0.10 ≤0.50 0.10~0.60 ≤0.030 ≤0.030 1.90~2.60 0.05~0.30       ≤0.030 1.45~1.75 B0.0005~0.006 0.02~0.08 ≤0.040
SA213 T91 0.08~0.12 0.20~0.50 0.30~0.60 ≤0.020 ≤0.010 8.00~9.50 0.85~1.05   ≤0.40 0.18~0.25 ≤0.015     0.06~0.10 0.03~0.07
SA213 T92 0.07~0.13 ≤0.50 0.30~0.60 ≤0.020 ≤0.010 8.50~9.50 0.30~0.60   ≤0.40 0.15~0.25 ≤0.015 1.50~2.00 B 0.001~0.006 0.04~0.09 0.03~0.07
DIN 17175 ST45.8/III ≤0.21 0.10~0.35 0.40~1.20 ≤0.040 ≤0.040                    
15Mo3 0.12~0.20 0.10~0.35 0.40~0.80 ≤0.035 ≤0.035   0.25~0.35                
13CrMo44 0.10~0.18 0.10~0.35 0.40~0.70 ≤0.035 ≤0.035 0.70~1.10 0.45~0.65                
10CrMo910                              

 
  Outer diameter: 20mm~114mm
Wall thickness: 1mm~10mm
Length: 6meters, 12meters, by random
Specifications of ma}or steel:
10,20,20G,20MnG,25MnG,15CrMoG,12Cr2MoG,12Cr1MoVG,12Cr2MoWVTiB,10Cr9Mo1VNb,SA210A1,SA210C,SA213 T11,SA213 T12,SA213 T22,SA213 T23,SA213 T91,SA213 T92,ST45.8/III,15Mo3,13CrMo44,10CrMo910etc.
Small Calibers Seamless steel tubes for high(low and medium) pressure boilers and petrochemical industry
Standards:
ASME SA 179,
ASME SA 192
DINl7175 Deutsches industrial standard~
ASME SA179 Cold Drawn Low Carbon Seamless Steel Pipe for Heat Exchanger and Condenser
ASME SA179 Cold Drawn Low Carbon Seamless Steel Pipe for Heat Exchanger and Condenser
ASME SA179 Cold Drawn Low Carbon Seamless Steel Pipe for Heat Exchanger and Condenser


Application:
Used as the pipes on the heated side of low and medium pressure boilers(normally with operating pressure not higher than 5.88Mpa and
operating temperature below 450 oc);as the pipes on the heated sides of high·pressure boilers,economizers,overheaters,reheaters and pipes
for petrochemical industry(with the operating pressure above 9.8Mpa and operating temperature ranging between 450~C~650~C1

Diamensional tolerances:
Types of steel tubes Outer diameters Wall thickness
Cold-rolled tubes Tube sizes(mm) Tolerances(mm) Tube sizes (mm) Tolerances(mm)
>30~50 ±0.3 >3~20 ±10%

 

Mechanical properties:
Standard codes Models of steel tubes Tensite strength(MPa) Yield strength(MPa) Elongation(%) Hardness
GB3087 10 335~475 ≥195 ≥24 /
20 410~550 ≥245 ≥20 /
GB5310 20G 410~550 ≥245 ≥24 /
20MnG ≥415 ≥240 ≥22 /
25MnG ≥485 ≥275 ≥20 /
15CrMoG 440~640 ≥235 ≥21 /
12Cr2MoG 450~600 ≥280 ≥20 /
12Cr1MoVG 470~640 ≥255 ≥21 /
12Cr2MoWVTiB 540~735 ≥345 ≥18 /
10Cr9Mo1VNb ≥585 ≥415 ≥20 /
ASME SA210 SA210A-1 ≥415 ≥255 ≥30 ≤143HB
SA210C ≥485 ≥275 ≥30 ≤179HB
ASME SA213 SA213 T11 ≥415 ≥205 ≥30 ≤163HB
SA213 T12 ≥415 ≥220 ≥30 ≤163HB
SA213 T22 ≥415 ≥205 ≥30 ≤163HB
SA213 T23 ≥510 ≥400 ≥20 ≤220HB
SA213 T91 ≥585 ≥415 ≥20 ≤250HB
SA213 T92 ≥620 ≥440 ≥20 ≤250HB
DIN17175 ST45.8/III 410~530 ≥255 ≥21 /
15Mo3 450~600 ≥270 ≥22 /
13CrMo44 440~590 ≥290 ≥22 /
10CrMo910 480~630 ≥280 ≥20 /

 ASME SA179 Cold Drawn Low Carbon Seamless Steel Pipe for Heat Exchanger and Condenser

Chemical composition:
Standard codes Models of steel tubes Chemical compositions(%)
C Si Mn P S Cr Mo Cu Ni V Al W Ti Nb N
GB3087 10 0.07~0.13 0.17~0.37 0.38~0.65 ≤0.030 ≤0.030 0.3~0.65 / ≤0.25 ≤0.30 / /        
20 0.17~0.23 0.17~0.37 0.38~0.65 ≤0.030 ≤0.030 0.3~0.65 / ≤0.25 ≤0.30 / /        
GB5310 20G 0.17~0.24 0.17~0.37 0.35~0.65 ≤0.030 ≤0.030 ≤0.25 ≤0.15 ≤0.20 ≤0.25 ≤0.08          
20MnG 0.17~0.24 0.17~0.37 0.70~1.00 ≤0.030 ≤0.030 ≤0.25 ≤0.15 ≤0.20 ≤0.25 ≤0.08          
25MnG 0.18~0.24 0.17~0.37 0.80~1.10 ≤0.030 ≤0.030 ≤0.25 ≤0.15 ≤0.20 ≤0.25 ≤0.08          
15CrMo 0.12~0.18 0.17~0.37 0.40~0.70 ≤0.030 ≤0.030 0.80~1.10 0.40~0.55 ≤0.20 ≤0.30            
12Cr2MoG 0.08~0.15 ≤0.50 0.40~0.70 ≤0.030 ≤0.030 2.00~2.50 0.90~1.20 ≤0.20 ≤0.30            
12Cr1MoV 0.08~0.15 0.17~0.37 0.40~0.70 ≤0.030 ≤0.030 0.90~1.20 0.25~0.35 ≤0.20 ≤0.30 0.15~0.30          
12Cr2MoWVTiB 0.08~0.15 0.45~0.75 0.45~0.65 ≤0.030 ≤0.030 1.60~2.10 0.50~0.65 ≤0.20 ≤0.30 0.28~0.42   0.30~0.55 0.08~0.15 B 0.002~0.008  
10Cr9Mo1VNb 0.08~0.12 0.20~0.50 0.30~0.60 ≤0.020 ≤0.010 8.00~9.50 0.85~1.05 ≤0.20 ≤0.40 0.18~0.25 ≤0.015     0.06~0.10 0.03~0.07
ASME SA210 SA210A-1 0.13~0.19 ≥0.1 0.45~0.65 ≤0.030 ≤0.030                    
SA210C 0.18~0.24 ≥0.1 0.80~1.10 ≤0.030 ≤0.030                    
ASME SA213 SA213 T11 0.05~0.15 0.50~1.0 0.30~0.60 ≤0.030 ≤0.030 1.00~1.50 0.50~1.00                
SA213 T12 0.05~0.15 ≤0.50 0.30~0.61 ≤0.030 ≤0.030 0.80~1.25 0.44~0.65                
SA213 T22 0.05~0.15 ≤0.50 0.30~0.60 ≤0.030 ≤0.010 1.90~2.60 0.87~1.13                
SA213 T23 0.04~0.10 ≤0.50 0.10~0.60 ≤0.030 ≤0.030 1.90~2.60 0.05~0.30       ≤0.030 1.45~1.75 B0.0005~0.006 0.02~0.08 ≤0.040
SA213 T91 0.08~0.12 0.20~0.50 0.30~0.60 ≤0.020 ≤0.010 8.00~9.50 0.85~1.05   ≤0.40 0.18~0.25 ≤0.015     0.06~0.10 0.03~0.07
SA213 T92 0.07~0.13 ≤0.50 0.30~0.60 ≤0.020 ≤0.010 8.50~9.50 0.30~0.60   ≤0.40 0.15~0.25 ≤0.015 1.50~2.00 B 0.001~0.006 0.04~0.09 0.03~0.07
DIN 17175 ST45.8/III ≤0.21 0.10~0.35 0.40~1.20 ≤0.040 ≤0.040                    
15Mo3 0.12~0.20 0.10~0.35 0.40~0.80 ≤0.035 ≤0.035   0.25~0.35                
13CrMo44 0.10~0.18 0.10~0.35 0.40~0.70 ≤0.035 ≤0.035 0.70~1.10 0.45~0.65                
10CrMo910                              

 
 

Stone Garden Decor

There are many ways to design stone carvings, among which the sink carving, also known as "line carving", is an artwork using the "water mill sink flower" carving method. This kind of carving method absorbs traditional techniques such as Chinese painting and meaning, overlapping, line modeling, scattered point perspective, etc. After the stone is polished by plane processing, it traces the pattern text, and then carves lines according to the drawing, with the thickness and depth of the lines, using shadows to reflect the three-dimensional sense. Most of these products are used for exterior wall surface decoration of buildings, with strong artistry.

Stone Garden Decor,Cast Stone Garden Decor,Cast Stone Garden Decor Fountains,Outdoor Stone Garden Decor

The universe in the stone is great , https://www.zdartwork.com