>>>Link: Standards for Acceptance of Paint Construction â– home improvement warranty After staying in a new house for a period of time, people will find that some items in the room have begun to undergo minor changes, such as dry cracks in wood products, cracks in the walls themselves that are unclear, and water leakage in the plumbing of sanitary wares. . When the project was accepted, some of the items that were difficult to check at the time, such as the unstable connection of the switch socket, affected the daily life of the owner. All these problems need to be resolved during the warranty period. â– Items that are difficult to reach once Humidity-affected items: The biggest feature of Beijing's climate is the great difference in air humidity between the rainy season and the dry season. During the rainy season in July, August and September, the air humidity is very high. Therefore, many decorative materials used in decoration, such as wood and wood products, have higher moisture content than other seasons. In winter, the humidity of indoor air dropped to a very low level, and the moisture content of wood and wood products dropped to a very low level. Therefore, in any season of the year (such as the rainy season), the renovation of a house will occur in a contrasting season (such as dry season) after the completion of the project. The problem is that no matter what construction measures are taken, it is difficult to completely solve it. Therefore, woodworking projects belong to the construction projects that are most affected by the climate. Projects that are more affected by the buildings themselves: We often hear complaints that the owners found the walls cracked shortly after the house was renovated, and most of them appeared on the inside of the exterior wall with insulation. And these problems directly affect the decoration company's engineering quality acceptance. In fact, the decoration company has some guilty responsibility for this, because using the same construction tools, the same construction personnel, indoor partition walls rarely see cracks like the inside of the outer wall insulation layer, so realistically speaking, this issue It does not have much to do with the decoration company, but it is mainly due to certain reasons of the building itself. Multi-type connection projects or locations: At sites with tight schedules, it can be found that the kitchen and toilet tiles (hollow drums), sanitary ware (water problems), and lighting sockets (virtual connections) are prone to quality problems. Most of the problems were caused by the close integration of various types of work and the lack of necessary intervals for the quality inspection of various types of work. â– What kind of warranty service is ideal Most people think that the purpose of the warranty is to fix the problematic item. In fact, the warranty is to extend the overall life of the project. Targeted warranty for the project: As the home improvement project does not necessarily have quality problems at the same time, there is a targeted warranty, such as a certain period or time to send plumbing workers to repair the upper and lower water pipelines, send woodwork inspection doors Locking handles and hinges, or sending electricians to inspect the circuit for quality problems, etc., have a clear purpose of the warranty, and can directly improve the quality of life of the owners who are affected by the decoration. Warranty according to seasonal characteristics: As we have already mentioned before, in the rainy season renovation project, dry wood products will appear dry cracking problems, which directly affect the life of the project, so according to the characteristics of the season, in the dry season to send paint workers to the owner's home to The cracked parts of the dry cracked woodwork refill the putty and paint, which reduces the probability of the woodwork continuing to crack. Money decoration decoration paint decoration company interior decoration socket overall bathroom bathroom door bathroom leaking bathroom floor tile Deep Groove Ball Bearing is the most representative structure in rolling bearing, which is widely used. In addition to radialload, this kind of bearing can also be loaded with bidirectional axial load. The friction torque is small, and it is most suitable for adjusting rotation, low noise and low vibration. Bearings are widely used in automobile, electrical, instrumentation,construction machinery, agricultural machinery and various professional machinery. This kind of bearing has open and closed deformation structure. Skateboard Bearing,Ceramic Bearing For Skateboard,Skateboard Ball Bearing,Deep Groove Ball Skateboard Bearings Shijiazhuang Longshu Mechanical & Electrical Equipment Trading Co., Ltd. , https://www.lsjgbearing.com
Home equipment warranty knowledge