<<<Links: Construction Sequence and Construction Method for Brush Paint The TV background wall is the project that most of the decoration customers are most concerned about. Although it is now claimed that it is not a TV background wall, the TV background wall has the highest browsing rate from the viewing of the online gallery. It is produced in a variety of ways, including gypsum board modeling, aluminum-plastic panel, Malay paint, paint color modeling, wooden paint modeling, glass, stone modeling, and wallpapering. Wall construction socket TV wall paint living room background living room TV decoration living room glass brick Compatible with all kinds of ballasts, no need to replace the ballasts directly install the lamp Compatible Light Tube,T5 Led Tube Light,Led Light Bulb,T8 Led Light,T8 Led Tube Light,4Ft Tube Bulb Light Compatible Foshan Yichu electronic lighting Co., LTD , https://www.eonelights.com
The production should be considered: if it is a wall-mounted TV, the wall should have a position (pre-embedded or strong base) and enough sockets (suggestion: buried a thicker PVC pipe, all the wires can It is through this pipe that the TV cabinet is under (DVD line, closed line, VGA line, etc.).
Consider the width of the living room: The best distance for the human eye from the TV is 3.5 times the size of the TV, so do not make the TV wall too thick, resulting in a small living room.
Taking into account the position of the sofa, the position of the sofa is determined, the position of the television is determined, and then the shape of the modeling wall is determined by the size of the television.
Consider the light echoed above the TV: The TV wall generally echoes the top part of the ceiling. There is usually a light on the ceiling. Therefore, consider the modeling of the wall and the lighting. Consider that you do not use strong light to shine on the TV and avoid watching it. Eye fatigue during the show.
When the carpenter works as a TV wall, he looks at the air-conditioning socket. Do not seal the air-conditioner socket, and he must also move the socket out.
When constructing the wall surface, the thickness of the floor tiles and the height of the baseboard should be taken into account to ensure coordination of the various shapes. If there is no baseboard for the design, the installation of the panel and gypsum board should be performed after the construction of the floor tiles to prevent moisture. .
Some construction points of the TV background wall