Good Quality Reactive Red Dye

Model NO.: Reactive Red 13/Kayacion Scarlet P-R/Xiron Scarlet
Technics: Dip Method
Classification: Vinyl Sulfone Type
CAS: Reactive Red 13
Einecs No: Reactive Red 13
Owf: 2.0
Application: Cotton Fabric Dye
Application2: Acrylic Dyes
Application3: Wool Silk Dye
Trademark: Emperor
Transport Package: 25kgs/Paperbox, Paperboard Drum, Iron Drum
Specification: 25kg
Origin: China
HS Code: 3204160000
Good quality Reactive Red Dye
 
Hangzhou Emperor chemical Co.,Ltd is engaged in dyestuff research and development and production of high-tech enterprises.Our company was established in 1998,located in Zhejiang province,Hangzhou city,Our dyestuff is widely use on differet applications such as painting,leather,paper,cotton,wood,fertilizer,seed and so on.In 2000,our brand "Enoch®" was born,with years of service quality improvement and technical innovation,Today "Enoch®"have been reputed for both domestic and international market.
 
Emperor,is committed to provide complete customer satisfaction when it comes to the quality,performance,timely delivery and prices of products.We believe quality is the life of Emperor,we have addressed certain critical measurements to assure quality and performance,such as viscosity,surface tension,PH,conductivity,color,and purity,light fastness in order to control as many variables as possible and produce best product possible.
 
Our Mission is to lead the industry in creating value for our customers through dedication on standards,quality,productivity and customer satisfaction.
 
Our Vision is emperor aims to be best dyestuff producer in the chemical industry.
 
Reactive Red 13
Good Quality Reactive Red Dye
Reactive Red KD-8B
Exhaust Dyeing ---
Continuous Dyeing ---
Cold pad-batch Dyeing ---
Solubility g/L(50 degree) 150
Light(Xenon)(1/1) 5
Washing(CH/CO) 4 3
Perspiration AIK 4
Rubbing(Dry/Wet) 3-4 2-3
Hot Pressing 4
Sample Testing
We welcome our customers to send us the samples they are using now. We will test the samples, do the comparison, and recommend our similar items to our customers.Or we will adjust the quality according to customers' request.
 
We welcome the chance to send our samples to customers to test. If our samples can match customers standard, we will move to orders. If they can't match customers standard, we will resend samples according to the quality difference
 
HANGZHOU EMPEROR CHEMICAL CO., LTD
add:Room 2402 Building3-1,Ningan road 7,Xiaoshan District,Hangzhou,China
 
 

Optical Coatings

  • Single + Dual Wavelength AR Coatings (VAR / DAR):A single wavelength V-coat will provide reflectance less than 0.25% for 0° incidenceor 0.5% for 45° incidence at the chosen wavelength. Dual wavelength coatings will approach the performance of V-coats for two selected wavelengths. They are useful for optics which must transmit a visible alignment laser as well as a UV or near IR process beam. It is also useful for transmission of fundamental and first harmonic wavelengths.
  • Broadband-AR-coatings:Anti-reflection coatings are offered to reduce surface reflections to a minimum. Two types of broadband coating are offered. A single layer of MgF2 on Fused Silica or BK7 reduces reflections per surface to about 1.5% over a broad bandwidth. If lower reflectance is required a multilayer broadband coating will provide an average reflectance less than 0.5% per surface.

  • Protected + Enhanced Metallic Coatings (PAL / EAL / PAG / EAG / PAU / EAU)

    Metallic coatings make very broad bandwidth reflectors. Usually it is best to protect the coatings with a durable dielectric layer as they are very soft and susceptible to scratching. The efficiency of metallic reflectors falls off at shorter wavelengths but this may be enhanced by the application of a multi-layer dielectric thin film stack. The table shows the reflectance of each of the metals without any protection or enhancement. Protected metallic coatings have a dielectric coating layer over the metallic layer to protect the coating from being oxidized in the air or from scratched. For enhanced metallic coatings, a stack of dielectric layers are added on the metallic coating to increase reflectance for a particular wavelength range.
  • Dielectric High Reflective Coatings:

  1. Broadband HR coatings provide an average reflectance of 99% over a broad range of wavelengths. These broadband mirrors may be used for white light or multi-spectral applications.
  2. Single wavelength, high power HR coatings are suitable for intra and extra cavity use. They provide the ultimate high reflectance of Rs > 99.8% and Rp > 99% for a specific wavelength. They may be used as a rear cavity reflector or for extra cavity use in beam delivery or turning. Note that Lambda high quality visible laser cavity coatings are designed for low scattering.

  • Dichroic Beamsplitters – Beam Combiners – Harmonic Separators (SPD / LPD / BC / HHS)

  1. Separate or combine beams with different wavelengths:Separate or combine beams with different wavelengths. These dichroic coatings allow one wavelength region to be transmitted while they reflect another region. They may be used as illustrated to separate or combine different wavelengths. This can be useful when working with alignment lasers or frequency doublers.
  2. Dichoric Beamsplitters:These long-pass and short-pass coatings may be applied to any optical component to separate or combine different wavelength regions. They are available for normal and 45° angle of incidence. These coatings are highly effective for the wavelength of interest, reflecting over 99%. While they transmit over 85% of other nearby wavelengths, they are not blocked over a broad spectral range.

  • Highly Transmissive AR Coatings For FLIR Applications:

Metallic coatings make very broad bandwidth reflectors. Usually it is best to protect the coatings with a durable dielectric layer as they are very soft and susceptible to scratching. The efficiency of metallic reflectors falls off at shorter wavelengths but this may be enhanced by the application of a multi-layer dielectric thin film stack. The table shows the reflectance. of each of the metals without any protection or enhancement. Protected metallic coatings have a dielectric coating layer over the metallic layer to protect the coating from being oxidized in the air or from scratched. For enhanced metallic coatings, a stack of dielectric layers are added on the metallic coating to increase reflectance for a particular wavelength range.

  • IBAR : IR Broadband AR Coatings : Coatings for 3-5 µm and 8 – 12 µm bands

Infra-red broadband anti-reflection coatings are offered for the two broad spectral passbands of 3 – 5 µm and 8-12 µm. Coatings are designed for the refractive index of the substrate so it is necessary to offer separate coatings for different substrate materials. Standard coatings are offered for Zinc Selenide and Germanium. These coatings are highly durable and can be cleaned repeatedly using normal optics handling techniques. They are suitable for high power laser use such as that emitted from a CO2 laser.


Optical Coatings,Optical Grade Coatings,Vampire Optical Coatings,Optical Interference Coatings

Lambda Research Optics ChangChun,LTD. , https://www.lambdachina.com