We are engaged in medium and high-end LED decorative lighting with a whole set of design and manufacture of lamps and lanterns, development of control system and engineering supporting service. Our company is devoted to provide customers with LED application products, which is energy-saving with high efficiency, stable of quality and innovative technologically. We wholeheartedly develop a world's most competitive enterprise with professionally high quality LED lighting and contribute to energy saving and emission reduction of humanity and the great cause of increase in green earth! Our LED series products can be used extensively in different lighting occasion such as bridge building elevation profile, light-projection, floodlighting, roadway lighting, tunnel lighting, square lighting, waterscape lighting, supplementary lighting for monitoring facility, vegetative lighting, household lighting, commercial lighting, leisure entertainment spots, outdoor advertising; we will market more and better new LED lighting products with higher efficiency and energy conservation in the future. Synno has got through ISO9001 quality system certification of SGS of Switzerland, CE certification of European Union, GS certification, ROHS certification and relevant domestic LED lamps and lanterns certification; we have brought our competitive products with reliable performance to every corner of the world, at present 60% of our products have exported to about 30 countries and regions. With the concept of quality first, credit first, service first, we sincerely wish to have the chance to build friendly strategic partnership with wide customers and friends. Synno expects to make acquaintance with you, know you and create a beautiful future with both efforts! Led Spike Light,Led Spike Garden Lights,Outdoor Led Spike Light,Led Garden Spike Lights,Led Spike Spot Light Jiangmen Synno Lighting Co., Ltd. , https://www.synnoled.com
Specification
Name: 6000 series Aluminum Sheet
Alloy: 6061, 6082, 6063 etc. Temper: O, H112, T4, T6, T651 etc. Thickness: 6-200mm Width: Up to 1500mm Surface treatment: mill finished, Print marks
Feature
Machinability: In the harder T 4 and T6 tempers it is good. It is notably less easy to machine in the annealed temper.
Forming: Easily cold worked and formed in the annealed condition. Stamping, bending, spinning, deep drawing are all readily accomplished using standard methods. Welding: It has very good welding characteristics and may be welded by all of the common welding techniques. Heat Treatment: Solution heat treat at 990 F for adequate time to allow for thorough heating and then water quench. Precipitation hardening is done at 320 F for 18 hours and air cool, followed by 350 F for 8 hours and air cooling. Forging: It is capable of being hot forged at temperatures in the range of 900 F to 750 F. Hot Working: Hot working may be done in the temperature range of 700 F to 500 F. Cold Working: Cold working in the O temper condition is readily performed. The alloy is notably less easy to cold form in the T 4 and T 6 tempers. Annealing: Annealing should be done at 775 F for 2 to 3 hours followed by controlled cooling at 50 f per hour down to 500 F, then air cool. Aging: The aging precipitation heat treatment is done at 350 F for 8 hours followed by air cooling. This produces the T6 temper.
Application
Commonly used in the manufacture of heavy-duty structures requiring good corrosion resistance, truck and marine components, railroad cars, furniture, tank fittings, general structural and high pressure applications, wire products, pipelines, various toolings etc.
Â
Alloy
Chemical Component %≤
Si
Fe
Cu
Mn
Mg
Cr
Ni
Zn
Ti
others
Al
single
total
6061
0.4- 0.8
0.7
0.15-0.4
0.15
0.8- 1.2
0.04-0.35
\
0.25
0.15
0.05
0.15
remainder
6082
0.7- 1.3
0.5
0.1
0.4- 1.0
0.6- 1.2
0.25
\
0.2
0.1
0.05
0.15
remainder
6063
0.2-
0.60.35
0.1
0.1
0.45-0.9
0.1
\
0.1
0.1
0.05
0.15
remainder
Contact
Ms. Sunny Mao
Â
Mobile:86-18660566415
Company introductions:
Our packing:
Welcome to contact me for more information and solution.
Â
Â
Web:www.ytbaodi.com
China Aluminum Alloy Sheet and Plate Metal Price for 6061 6082, 6063, 6262 From Factory
Model NO.: 6061, 6082
Trademark: BAODI
Specification: 4′*8′
Origin: China
HS Code: 760612
Our company produce aluminum sheet and plate 6061-T6,6082-T,more than 3000tons stock ,no Minimum orders,standard size.Cut to size for you.Aluminum sheet has very good machinability.Pls see the details: