LINEAR FLOOD TWIN LIGHT was born for supermarkets. It has outstanding optical performance and super stylish appearance. Its functions are also very powerful. Adjusting the illumination angle and low glare are its basic configurations. The best match for large-scale commercial supermarket lighting. Panel Light Led,Suspended Light Ceiling Panel,Track Light Hanging,Flexible Track Light,Led Lighting Fittings SHENZHEN LITEHOME OPTOELECTRONIC TECHNOLOGY CO., LTD. , https://www.litehomelights.com
Scope of application
In order to meet the need for high-intensity floodlighting in flammable and explosive locations, the developed explosion-proof floodlights are suitable for large-area floodlighting in various flammable and explosive locations and outdoor operations, construction sites, installations, and facilities. illumination.
1. Zone 1, Zone 2 or Zone 20, Zone 21, Zone 22 hazardous locations; 2. Category IIA, IIB explosive gas environment or flammable dust environment.
Performance characteristics
1. The light source adopts international famous brands, with reliable performance and brightness about 20% higher than similar products. 2, orange pattern diffuse reflector can make the light soft, large amplitude of the irradiation angle.
3. The lamp body is made of high-strength aluminum alloy material, and the surface is treated with electrostatic spraying technology to make the lamp waterproof, dustproof and antiseptic to ensure that the lamp works reliably in various harsh environments.
4. The lamp adopts the side cover to open, and the light bulb can be replaced quickly. The lamp can be installed in a wall or wall-mounted position, and can be adjusted from 45 to 90 degrees.
Technical Parameters
Rated voltage: AC220V/50Hz protection class IP65
Anti-corrosion grade WF2
Insulation class I
Introduce the cable φ10mm-φ14mm
Overall size lamp body 433×387×202mm
Explosion-proof ballast box 288×203×125mm
Heavy integrated lamp + electrical box 16.1Kg
Quantity split lamp 9Kg electrical box 6.8kg
With light source:
Order No. Light Source Rated Power Luminous Flux Average Lifetime Weight Weight Temperature Group BC9130-J250 Metal Halide Lamp (MH) 250W25000lm10000h17KgT4
BC9130-J400 Metal Halide Light (MH) 400W36000lm10000h19KgT3
BC9130-N250 HPS250W27500lm28500h17KgT4
BC9130-N400 High Pressure Sodium Lamp (HPS) 400W50000lm28500h19KgT3
Instructions
According to the actual needs of the work site to determine the lighting installation location and method, and then according to the distance from the lamp to the power contact to prepare the corresponding length of Φ8 ~ Φ14mm three-core cable.
Open the end cap of ballast, loosen the pressing nut of the ballast cable inlet, and lead the lamp cable and power cable through the compression nut to the internal terminal of the ballast, connect and fix, and tighten separately. Cables tighten nuts and tighten ballast end caps.
According to the determined installation location and method, the lamps and ballasts are installed, and the other end of the input cable of the ballast can be connected to the 220V power supply according to the requirements of explosion-proof.
Loosen the screws at the bottom of the lamp holder bracket, and adjust the lighting position by rotating 360° around the lamp holder; loosen the screws on both sides of the lamp holder, adjust the lighting angle of the lamp holder up and down according to the lighting requirements, and then fasten the screws.
When replacing the lamp, use a suitable screwdriver or other tool to insert the front cover into the holes on the two front side of the front cover, remove the bad lamp, and replace the new one.
Note 1, the lamp is installed in the equipped carton during transportation, and foam shock absorption is added.
2. When installing and maintaining the lamp, you must disconnect the power supply.
3, when used, the surface of the lamp has a certain temperature rise, which is a normal phenomenon; the temperature of the center of the transparent part is relatively high and must not be touched.
4. When replacing the bulb, use the bulb of the same type and power; if you change the bulb type or power, replace the matching ballast accordingly.
safety warning
1. It is strictly forbidden to turn on the lamp with electricity.
2, non-professionals are not free to install, remove lamps and ballasts.
Twin Panel Linear Lights, as the name suggests, is a combination of line lights that look like two panel lights, which can emit the soft light of the panel lights without losing the modern beauty of the line lights.
LiteHome provides you with linear lights with diversified installation methods.
Concerned about the use of explosion-proof floodlights
Explosion-proof floodlight is a kind of point light source that can be uniformly illuminated in all directions. Its illumination range can be arbitrarily adjusted and appears as a positive octahedron icon in the scene. Floodlights are the most widely used light source in renderings. Standard floodlights illuminate the entire scene. Explosion-proof floodlights are used in hazardous locations where flammable gases and dust are present. They can prevent arcs, sparks, and high temperatures inside the lamp from igniting flammable gases and dust in the surrounding environment, thereby meeting explosion-proof requirements.