Really every factory in the production of tube-shaped or arc-shaped sliding contact line should be determined according to the customer's requirements and the actual situation of the workshop. The following Xiaobian must talk about the production of arc-shaped sliding contact line. Pay attention to where the friends who are interested in the trolley line can look at Xiaobian.
1. We must first determine how much current this product can withstand, but also to determine the size of its own current, Xiaobian in this proposal if the current is too large, then we can recommend the use of unipolar.
2. The arc length should be as long as possible, and the radius should not be too short. If it is too short, it will easily lead to the normal operation of the current, which will result in the phenomenon of power failure. Not working properly.
3. We must choose to install the rail on the outside or inside before selecting this product. Different locations will have different product radius requirements.
1. We must first determine how much current this product can withstand, but also to determine the size of its own current, Xiaobian in this proposal if the current is too large, then we can recommend the use of unipolar.
2. The arc length should be as long as possible, and the radius should not be too short. If it is too short, it will easily lead to the normal operation of the current, which will result in the phenomenon of power failure. Not working properly.
3. We must choose to install the rail on the outside or inside before selecting this product. Different locations will have different product radius requirements.
Filters,Analyse Test Cuvette,Analyse Quartz Cuvette,Cuvette & Flat Plate
Yixing Jingke Optical Instruments Co.,Ltd. , https://www.jkgxcn.com