Air compressor installation site selection

1. When the air compressor is installed, it is necessary to have a wide and well-lit place to facilitate operation and maintenance.

2. The relative humidity of the air should be low, the dust is small, the air is clean and well ventilated, away from flammable and explosive, corrosive chemicals and harmful unsafe articles, and avoid places close to dust emission.

3. When the air compressor is installed, the ambient temperature in the installation site should be higher than 5 degrees in winter and less than 40 degrees in summer because the higher the ambient temperature, the higher the air compressor discharge temperature, which will affect the performance of the compressor. If necessary, ventilation or cooling devices should be installed at the installation site.

4. If the factory environment is poor and there is a lot of dust, install pre-filter equipment.

5. The air compressor installation site should be arranged in a single row.

6. Reserve access roads, equipped with conditions can be installed cranes, in order to facilitate the maintenance of air compressor equipment.

7. Reserve space for maintenance. There must be at least 70 cm distance between the air compressor and the wall.

8. The air compressor is at least one meter away from the top space.

Tin Copper Solder Wire

Tin Copper Solder Wire,Soldering Wire Sncu,Rosin Cored Solder Wire,Hand Soldering Wire Rohs

NINGBO XIHAN TIN SOLDER CO.,LTD. , https://www.soldertop.com