When the bathroom was renovated, the tiles began to be used in large areas, whether it was a monochrome tile or a collage tile, which had a unique charm. How much do you know about the paving technique of mosaic tiles? How to use mosaic tiles to show the makeup of the bathroom? Today, Xiaobian will share the mosaic tile laying skills with you, and five steps will help you to perfect construction. First, paving accessories Generally, the tile can be cemented, but the paving mosaic is recommended. Because the density of the mosaic is relatively high, the water absorption rate is low, the bonding effect of the cement is not good with the jointing agent, and the solidity of the mosaic cannot be guaranteed after the paving. Second, check the details After all the wall surface has been laid, the bonding layer is finally set, and after the joint is finished, check again, and the floating sand left in the seam can be gently taken out with a clean moist soft brush. The division joints should be flattened with 1:1 cement mortar, and then wiped with a cloth. The bonding layer and the jointing mortar are cleaned after final setting. Third, do a good job After the mosaic paving is completed, attention should be paid to the protection of the finished product, and appropriate air drying can be performed. In the freshly finished surface layer, the sun should be avoided. The room should be properly ventilated and kept until about 24 hours after the delivery. Generally, the post-laying of the mosaic should be no less than 7 days. Fourth, clean After the bonding layer and the jointing mortar are finally set, the mosaic surface can be cleaned. To clean the work, you need to prepare two buckets, one for new detergent and one for clean water. First, soak the rag in the bucket containing the detergent, do not wring it, then wipe the mosaic surface in a circular motion: then in the second Soak the sponge in a clean bucket, then wipe the mosaic surface with a sponge and wipe off any residue. 5. Finally, once again wipe the surface with a sponge until it is clean. Naips LED Emergency Down Light is specially designed for ceiling recessed emergency lighting. Automatically light at once when buildings main power outage. NON-MAINTAINED type and it can customized the emergency time for different wattage. We can also add the LED emergency driver kits to match different kinds of your LED downlights. Led Downlight With Emergency Backup,Downlight With Emergency Backup,Emergency Light Downlight,Led Emergency Downlight Foshan Nai An Lighting Electric Co.,ltd , https://www.ledpowerpack.com
Mosaic tile paving tips five steps to help you perfect construction