[China Aluminum Network] aluminum electrolytic production can be divided into side-entry anode rods from the roasting tanks, anodes inserted anode rods and pre-baked anode tank three major categories. Self-baking tanks produce electrolytic aluminum with features of simple equipment, short construction period, and low investment. However, there are smokes that cannot be disposed of, and the pollution environment is severe. Mechanization is difficult, labor intensity is large, and it is not easy to be large-scaled. The drawbacks that are not easily overcome are currently largely eliminated. At present, most countries and production companies in the world are using large pre-baked cells. The current intensity of the cells is very high. Not only is the degree of automation high, the energy consumption is low, and the single-channel production value is high, but it also meets the requirements of environmental regulations. China has completed the industrial experiments and industrialization of 180 kA, 280 kA and 320 kA modern prebaked cells. The improvement and transformation of skills centered on energy conservation, production and environmental protection has promoted the conversion of self-baked tank production skills into pre-baked cells and has achieved great success. The Coat Hook Oak,Coat Hook Knobs,Coat Hook Pegs,Coat Hook Shoe Rack Heshan Zhongxin Sanitary Ware Ind., Co., Ltd , https://www.baolongfaucets.com
The main production technology of electrolytic aluminum