What does the high-gloss half-light matte in the paint index mean?

Matte paint can be used to decorate decorative wall Furniture, etc. In the past, people all like to use high-gloss paint to decorate, and now the constant change of the aesthetic and living standards, found that high-gloss coating film surface in the light Under irradiation, there is a stimulating effect on human eyes, so people need a soft gloss, no stimulation to human eyes, and very elegant matte finish, matte paint has become the primary choice. So what is a matte paint? Let's take a look at the matte paint introduction!

Matt paint has quietly entered people's home lives, but most people do not quite understand what matt paint is. So what are the advantages of matt paint and how can it be done? The advantages of matt lacquer: 1. The matt lacquer does not increase the brightness like the bright lacquer and add some substances harmful to health, so it will be safer and more environmentally friendly. 2. There is no strong reflection. It is good for protecting children's innocent vision. 3. Although the scrub will be smoother than the paint

Paint is an important material in the home improvement. The paint not only has a good effect on the decoration, but the paint is also environmentally friendly. In the paint of many brands, how is the cost of the three trees paint? Let's take a look at how the three tree paints and the price of the three tree paints can be used to determine the cost performance of the three tree paints. Let's take a look at the small series below.

The most important thing is to buy the packaging: lift the paint bucket and shake it. If there is a crackling sound, it means that the packaging is seriously lacking, and there are two shortages, and the viscosity is too low. The formal factory is really real and can hardly hear the sound. . Buying the least consumption: consult the merchant about the number of painting times and the area of ​​the painting, the amount of calculation and the cost per square meter of the material, the paint consists of solids (film forming material) and volatiles, the high solid content 70% to 80%, less than...

Foaming: high moisture content on the surface, high humidity, high temperature, poor backing of the putty, and insufficient interval between layers. Pinhole: Too little diluent is added, the viscosity is too large, the coating is too thick, the interval between layers is not enough, the standing time for the paint after diluting is not enough, and the diluent volatilizes too slowly. Pelleting: The construction environment is unclean, the workpiece contains oil, water, dust, etc., the mixed impurities in the coating are not filtered, the brushing tools and containers are not clean, the paint is not fully stirred, the filtering time and the standing time are not...