Wallpaper construction is an art, the tools required must be professional, the following are the conventional tools used in wallpaper construction. 1. Gluing machine: paper output and glue. After the construction, clean the residual glue on site. (roller: clean and wash in time, squeeze out moisture) 2, wallpaper glue: it is recommended to use imported wet glue, it is not recommended to use powder glue, and pay attention to the deployment method, the proportion 3, the blade: different wallpapers use different blades, generally can be roughly divided into large and small blades. 4. Roller: Cannot be used when the machine is glued. Pay attention to clean up and wash in time, and squeeze excess water before applying glue. 5, cutting knife: in order to keep the wallpaper straight, you must use a special cutting knife. 6. Pressure roller: keep it clean, do not touch the residual glue, and wipe it frequently. 7, scraper: drive out the excess glue, excess air bubbles. 8, brush: smooth the surface of the wallpaper, not soaked 9, protective belt: requires light and thin, do not eat glue, the role: to protect the wallpaper surface from wallpaper glue pollution 10, edge banding glue: suitable for maintenance joints 11, and paper tape: strengthen the joint strength of the wallpaper seams, to ensure that the seams are not cracked 12, plastic buckets, buckets: use glue, clean the towel when used separately. It must be kept inside and outside every day, and there is no glue left on the edge of the barrel. The residual glue and sewage need to be brought back, and the sewer pipe that does not enter the customer site is not obtained. 13. Ladder: Make a wrap angle and a protective cover to prevent scratching the floor. 14, sponge, towel: white or light color, must be cleaned after use every day. 15, toolbox, toolkit 16, shoe covers 17. Floor protection film: to prevent the finished floor from being contaminated and scratched. 18, wallpaper protective film: easy to pollute, difficult to clean the wallpaper after construction, need to cover the surface of the wallpaper protection 19. Garbage bags: Broken blades should not be discarded by hand. They should be placed in the pockets of the overalls, or carried around and hung in the garbage bags on the side of the ladder. The remaining materials on the site should not be discarded on the floor. Large waste should be placed. In the bag 20, other: plumb line, tape measure, syringe, etc. Hydroponic grow system includs grow tent, vertical grow rack, Rolling Bench, greenhouse, grow tower, grow box and temperature humidity controller. All these grow equipments used for cannabis, marijuana, vegetable, microgreen, medical plants, flower and any plants growing. The grow tent, vertical grow rack, greenhouse and any other grow system we have all with different size and fit for the different plants grow. So we design and produce all kinds of led grow lights and growing system. Sincerely hope we can help growers to win more yield. Hydroponics Grow System,Indoor Hydroponics Grow System,Horticulture Hydroponic System,Aeroponic Hydroponic Grow,Indoor Grow Equipment Shenzhen MixLux Technology Co., Ltd , https://www.mixluxled.com
Wallpaper construction tools