Second-hand housing renovation is a systematic project, to reflect the concept of energy conservation in the decoration process, should be considered when buying a house. From housekeeping, design to construction, and through the idea of ​​economy, good results can be obtained. In particular, some of the older housing estates that have a relatively long age have many ways to carry out energy-saving and energy-saving renovations. >>> Second-hand housing renovation Do not blindly renovate the old floor The first step: Bring an expert to choose a "thick" house Second-hand houses, especially the old ones, are of varying quality and are generally renovated by the original owners. Sometimes the decor will cover cracked corners, mold, water leaks and other problems. Therefore, when purchasing a home, it is best to bring a professional decoration supervisor, from the facade to the corridor, from the wall, the ground to the doors and windows, and pipes, and carefully observe every detail. Understand the overall structure of the house, whether the house has damaged the structure of the decoration, there is no private ride, remodeling caused damage to the main structure. Attention should be paid to the workmanship when checking: whether the wall surface is flat, whether it is wet or cracked, whether the edge of the wall, window edge, or ceiling is detailed or not, and whether the drainage system is normal. Some old houses are hard to find drawings when they were renovated. Therefore, they must communicate more with the owners to understand the internal structure of the house, including the direction of the pipeline, the location of the load-bearing wall, and so on, so as to facilitate the renovation. Quality problems are more prominent in the house, will affect the future of the transformation project, it is recommended not to buy; if there is only a small problem that can be resolved, remember to point out to the owner, and can be used as a bargaining bargaining chip. There are experts in the "eye of the eye" to help guide, select a set of main decoration is basically in place, there is no quality risk of second-hand housing, can save a lot of trouble for the future renovation. The second step: turning waste into treasure, spending small money becomes bigger The transformation of a 100 square meter second-hand housing, if the design is reasonable and fully utilized, can save at least 10,000 yuan. Which places can be reused and turn waste into treasure? In fact, the floor, tiles, windows and doors, and even old furniture left by the former owners can all be used. If properly reconstructed, you can spend a small amount of money and become bigger. If the style and texture of the floor left by the former owner is good, you may consider keeping it. During the renovation, the construction workers are required to put several layers of cardboard on the floor to protect them. If you are not satisfied with the original floor, you can use it as a base and cover it with a new floor, which can enhance the moisture-proof effect. Improvements in doors and windows, if successful, can also save a lot of money. The new owner can decorate the original door, or use the original door as a rough door to change the style. Kitchen hanging cabinets or some of the better quality old furniture are also objects of transformation. Re-brushing with paint, or re-applying decorative panels on the outside, and spending a bit of thought and creativity, will be able to "turn into a rotten magic." Step 3: Use more energy-saving products to change the green home Many old public houses are old and were built without energy-saving materials. During the renovation, energy conservation was just carried out, so that the old house was also “greenâ€. Energy-saving renovation can be started from the following: replace the original single-glazed ordinary window with an insulating glass window; install a movable external shading device outside the window to reduce the high temperature caused by the direct sunlight; apply a layer of thermal insulation mortar on the inner wall; Windows installed sealing strips and so on. In addition, curtains with dense fabrics, good insulation and warmth, and sealed security doors can also assist in insulation. In the installation of electrical appliances, it is recommended to use energy-saving lamps, solar water heaters, energy-saving air-conditioning, energy-saving refrigerators and other products. In addition to installing water-saving faucets and water-saving sanitary products, the separation of the wet and dry is also a major point in the water saving of bathrooms. Light tiles and floor tiles can be used in the bathroom, and the use of porous matt bricks will reduce the amount of water used during daily cleaning. Although the purchase of energy-saving products is slightly more expensive than ordinary products, from the monthly bills for electricity, water, gas, etc., we can really feel the effect of energy conservation, and at the same time, we can provide a copy of the environmental protection. Force, live more comfortable, why not? Second-hand House Windows House Renovation Houses Glass Renovation Designs Glass Bricks Glass Furniture Kitchen Doors Flooring Tiles Glass Doors Kitchen Glass Sliding Doors Bathroom Tiles Wet and Dry Separation Bathroom Bathroom Doors Monolithic Toilets Bathroom Designs Bathroom Tiles Toilet Leaking Floor Tiles Kitchen Tiles
Second-hand house renovation guide