In the process of working the cement foaming machine, pay attention to cooling. After working for a period of time, check whether the motor temperature is too high. If the temperature is too high, measures must be taken to cool down to improve its work efficiency. Hot Sale,High Quality Hot Sale,Hot Sale Details, CN Dongguan Maimeng Cultural Communication Co., LTD , https://www.icollectoys.com
The large and small cement foaming machine motor is an important part of the machine that can run normally. If the motor is in working condition for a long time, it is prone to burn out. In order to make it work longer, we need to take the following protective measures for it:
1. When it is found that the motor of the cement foaming machine is relatively hot, the door should be opened in time for ventilation.
2. Frequently ventilate the motor of the foaming machine so that it cannot be too hot.
3. The cool wind from the electric fan can be used for cooling.
4. It is not very important to remove the things that block the heat dissipation of the motor, you can remove it.
The motor for protecting the cement foaming machine mainly adopts the cooling method. If the above points cannot be cooled, then we need to stop the machine for a while to avoid burning the motor. The motor of the cement foaming machine is its important power part, so the protection of the motor of the cement foaming machine is an important work that cannot be ignored.
The qualified foam cement products produced by Anhui Taiheng Cement Foaming Machine TH series for many years have uniform pore distribution and certain impermeability. In addition, in the fields of thermal insulation, high temperature resistance, sound insulation, etc., the unique foam cement with uniform pore distribution The advantages are also obvious. At the same time, due to some unqualified foaming agent or improper construction process caused by bubble turbidity, high cement usage, poor impermeability and other products, we should try our best to avoid and find out the reasons for improvement.
Is TH cement foaming machine widely used? A variety of construction machines are often seen on construction sites, among which cement foaming machine is one of the most common equipment. For different construction occasions, different models and different functions of foaming machine should be selected. What kind of equipment is used for specific occasions, if you do n’t understand anything, you are welcome to contact Taiheng Machinery Manufacturer, we will formulate a reasonable construction solution for you according to your specific situation.
The main purpose:
1. Insulation on the roof, look for slopes, underfloor insulation 2. Filling of non-load-bearing walls, upturned beam foundation pits 3. Insulation of industrial pipes, in-situ insulation of refractory furnaces, light rockery, bonsai, etc. Filling of large foundation pits, filling of highway subgrades, widening of roads, filling of bridge abutments, filling of voids inside mines, tunnels, etc.
================================================== ================================================== ====== 
Technical analysis: Overheat treatment scheme of cement foaming machine