Specific wasteland cleaning program

Everyone is talking about pioneering and cleaning, but what is wasteland cleaning? How to implement wasteland cleaning? How does the cleaning establishment plan this implementation process? Let's talk about it here!

First, what is wasteland cleaning?

Wasteland cleaning is the first cleaning project after a building has been properly installed or decorated. Building construction often involves a large amount of debris left in the process of construction or decorating. Concrete blocks, paint, glass glue, and rust are left on all kinds of floors and walls. Wait. These dirt must all be cleared up in the land reclamation work. Wasteland cleaning is a preliminary cleaning project before the real fine cleaning, but most of them are now completed with wasteland cleaning and fine cleaning. Therefore, wasteland cleaning is one of the hardest, most complicated and most laborious cleaning work. The quality of land reclamation and cleaning will directly affect the quality of future cleaning work in buildings, so it is very important to do a good job in wasteland clearance.

Second, wasteland cleaning construction procedures

1. Preparation Tools and Pharmacy: High-powered vacuum suction machine, multi-functional grazing machine, glass set tools, extension rods, buckets, marble blade, scraper, water coating device; universal cleaning agent, glass cleaner, ceramic tile Cleaning agents, ceramic cleaners, stain removers, acid cleaners, toilet cleaners, stainless steel cleaners, stainless steel brighteners.

1, cleaning cleaning wasteland cleaning site left behind by the decoration of garbage, cement blocks, paint, plastic glass, rust and so on.

2, using a high-power vacuum cleaner to vacuum.

3, wipe thin glass: wipe the glass frame with a towel first, then use a glass scraper to dilute the diluted glass aqueous solution, evenly smear the glass from top to bottom, and then repeat the above process, with a glass scraper to scrape clean from top to bottom, Wipe the traces of water left on the frame with a dry towel. The water mark on the glass must be wiped clean with glass, otherwise it will leave a trail on the glass.

4, bathroom cleaning: first of all to recognize the material of the bathroom ceiling, PVC board or aluminum-plastic board, different materials use different cleaning methods; use a board brush to clean the bathroom walls, focus on cleaning the gaps in ceramic tiles and tiles left on the surface of the plastic Traces, cement stains, etc.; use a towel to clean the toilet's sanitary ware; use stainless steel cleaning fluid to clean various faucets; use a floor scrubber to clean the floor; Sewage.

5, kitchen cleaning: construction procedures with the toilet clean, because the kitchen more stainless steel pipe fittings, should be the focus of cleaning stainless steel pipe fittings.

6, bedroom and hall: the wall with a vacuum cleaner to do the dust treatment, the use of row-type suction mouth from the top to the bottom of the dust suction, wipe lamps, switch boxes, exhaust home, air conditioning, exhaust outlet and so on.

7, door and box cleaning: first clear the door of the material, with a towel stained with professional cleaner diluted from top to bottom wipe, the towel folded into a box from the top of the door to start from left to right of the wipe, there are plastic stains The place can be treated with glue except for omissions and dead ends.

8, the ground cleaning: After the above cleaning work done, it began to do a clean floor. The ground also needs to be divided into materials, which are wood floors, tile floors, or stone floors. After the materials are separated, special detergents are selected to be diluted in proportion and cleaned. Rubber stains on the ground can be removed with a blade, stubborn glue can be used to deal with; a final procedure should be completed after a thorough inspection to confirm that there is no legacy.

9, the angle line: wipe with a towel, with a blade to remove the various plastic traces above the baseboard, paint and other points.

Third, wasteland cleaning precautions:

1. Do not use strong acid or strong alkaline cleaner when cleaning stone and stainless steel equipment such as marble or granite. Strong acid or strong alkali can cause discoloration and deformation of these materials.

2, cleaning clean sanitary ware, marble countertops, etc. can not use clean balls, blades and other hard objects, so as not to scratch the surface.

3, whether it is solid wood flooring or in line with the floor, do not wet too much water when cleaning, otherwise it will easily lead to deformation of the wood floor.

4, the most important is to find a regular wasteland cleaning company, under the premise of ensuring the personal safety of the cleaners.

Landscaping Cleaning Glass Stainless Steel Cement Paint Marble Floor Tiles Marble Tiles Glass Tiles Glass Doors Kitchen Glass Sliding Doors Bathroom Ceilings Bathroom Tiles Bathroom Doors Tiles Tiles Bedroom Lamps Floor Tiles Kitchen Tiles Bedroom Lighting