Decoration knowledge: how much cabinet thickness is appropriate

Recently, a netizen posted a message saying: “Recently when switching to the home market, some kitchen cabinets were found to have a thickness of 16mm, instead of the commonly used 18mm. Does everybody have any influence on the use of it? Will it cause defects on the surface? A long time will cause it. Is the cabinet deformed and even the door cannot be opened?"

Links: Qi Jiada explained the initial testing, retesting and installation procedures of the cabinet

The answer to a cabinet business for this problem is:

"About the cabinet thickness of the cabinet I do explain, there is no difference in the quality of the plate, the advantages of choosing 16mm is 1, light, 2, a little more use of space, 3, if you choose to use 18mm thick plate and Hettich door hinge There will be relatively large gaps in the door panels of the cabinet joints, as many imported fittings are designed with a 16mm board thickness."

Another merchant's answer is: “1,16mm board and 18mm board are not only well-known manufacturers but also well-known manufacturers are also used. 2. I personally think that 18mm board is better than 16mm board, because all the boards are connected with three-in-one 3. If you choose to choose 18mm thick board and Hettich door hinge, the doorboard of the cabinet joint will have a relatively large gap, because many imported accessories are designed according to the 16mm board thickness, this statement is wrong Large gaps in the door panels at the junction of the cabinets are a problem for the workers' technical level."

However, netizens explain whether the cabinet thickness is 16mm or 18mm. Some netizens believe that: “Those sheets of the same quality are thicker and thicker, but thick ones are also a lot more heavy. If the load on all load bearing positions is too high, then the life of the cabinet after assembly will naturally be reduced a lot. The premise of particleboard in guaranteeing quality As far as possible, the density of the plates is reduced and the weight is reduced, so the life span is long.” Since this is the case, why are there still people who use thick plates?

Some netizens believe that "the imperfect installation process is the most important reason! The standard installation process uses three and one to connect with the wood pin, and the rubber pin is added to the edge of the metal pin; in all the holes to install the hinge First, increase the plug, ensure that the paste is firm and not tripping, so as to ensure the service life and safety. If there is no such process, but the traditional threaded screw connection, then the simple screw bearing capacity is limited is difficult to guarantee not If the plate is thickened by 2mm in one year, the nail holding power of the plate can be appropriately increased. Then the cabinet can use the screw connection. This is the real reason that the low-tech manufacturers are forced to use high-cost plates. ”

Here to remind everyone, when buying cabinets, we must consult some related issues.

Cabinets to buy space home cabinet door cabinet door cabinet door