We are the Leading Manufacturer Pvc Moulding,Tbar,Pvc Mould,Pvc Extrusion Mould in China, it is new materials wall decoration for wall panel.
Our Pvc Moulding and Tbar is widely used in interior decoration like hotel, restaurant, laboratory, bathroom, home etc.
It is radiation free, water-proof, fire-proof, wear resistance (green decoration material).
Feature
1. Fireproof
Pvc Moulding is non-flammable and conforms to the national grade B1 standard (GB8624-2012 Grade B1).
2. Water-proofing and moisture-proofing
The product is allowed to long-term expose to moist environment.
3. Easy to install
Pvc Moulding is easy to cut, saw nail, stick. it has a smooth finish one side that can be taped and jointed ready for decoration including wallpapering, painting, texture coat and veneer, and a rougher side for tiling.
5. Environment
Pvc Moulding does not contain any organic solvents, formaldehyde, asbestos, oils or other toxic substances that can have a negative impact on the environment and waterways.
Specification size
2900mm
Surface Finish
High UV coating
Thickness
1-9mm
Color
Customized colors
Hardness
3H-6H
Materials
PVC
Type
Pvc Moulding
Installation
Easy installation
Life Span
15 years
Place of original
China
Pvc Moulding Exterior Decorative Ceiling Pvc Moulding,Decorative Outside Corner Pvc Moulding,Pvc Moulding With Marble Texture Shandong Kingmarble Decoration Materials Co.,Ltd , https://www.pvcpanel.de
First of all, all the cutting fluids may have solid impurities or residues, which are generally caused by the following reasons.
First, there is a problem with the filtration of the cutting equipment, and the filtration performance of the equipment is deteriorated or damaged, which will affect the discharge of impurities in the cutting fluid. It can be solved by improving the filtration or by the slag removal system.
Second, the bacterial growth in the cutting fluid is serious, resulting in impurities or residues. In the event of this phenomenon, the cutting fluid should be sterilized in time.
Third, the water diluted by the cutting fluid is too hard, and impurities such as metal salts appear in the cutting fluid for a long time. If this problem occurs, the water quality should be replaced in time or a cutting fluid with good hard water resistance should be used.
Fourth, the cutting fluid is used for a long time. There are other equipment oils, such as rail oil and other impurities mixed into the cutting fluid, so that impurities appear, and oil treatment should be carried out in time.
In addition, the operator is unsanitary in the metal processing process, throwing garbage everywhere, so that some garbage accidentally falls into the cutting fluid, and the problem of impurities appearing on the surface of the metal cutting fluid is also used. Therefore, it is necessary to do a good job in the cleaning of the metal processing workshop, and remind the operators to pay attention to keeping the system clean.
Method for treating solid impurities and residues in cutting fluid
Abstract In the process of using cutting fluid, metal processing manufacturers often have solid floating objects appearing on the surface of cutting fluid. This affects the performance and service life of the cutting fluid. So what should I do with the problem of solid impurities or residues in the cutting fluid? First of all,...
During the use of cutting fluids, metal processing manufacturers often have solid floating objects appearing on the surface of the cutting fluid. This affects the performance and service life of the cutting fluid. So what should I do with the problem of solid impurities or residues in the cutting fluid?